a compact electronic ballast in the base of the lamp
No, not a good idea. You have to use a 347 volt ballast.
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
To answer this question the voltage of the ballast must be stated and the type of lamp in the fixture.
When the ballast is to be purchased, look at the schematic that is on the label of the ballast. There it will tell you which ballast is good for which lamps and also let you know what length of tube the ballast is good for. Most of the new electronic ballasts allow for multiple connections of different size lamps.
a compact electronic ballast in the base of the lamp
flood the ballast
To be able to submerge in the water, the sub has to become heavier. Ballast tanks are utilzed for this purpose. Water is let into them, and the sub sinks. To rise, air is pumped into the ballast tanks, and the sub rises.
Massive ballast tanks can be filled with water or air, changing the weight and buoyancy of a sub. Once dived a sub can use hydroplanes to angle it towards the surface and use propulsion to drive to the surface.
to keep the sub level or help it to dive and surface
to keep the sub level or help it to dive and surface
The boat had two different types of ballast.
They help the sub go up and down. When water is allowed into the tanks, the sub goes down. When water is pushed out of the tanks, sub comes up.
A ballast is a ballast in most cases. So yes you should be fine.
yes..if we replace magnetic ballast with electronic ballast...there is no need of starter if we use electronic ballast.
No. The lamp has to match the ballast. The lamp will not ignite if the wrong ballast is used.
A submarine has tanks that are called ballast tanks. When these tanks are flooded with sea water, the submarine sinks because the sub weighs more than the water it displaces. To rise again, the sub reduces its weight by pushing compressed air into the ballast tanks. The air forces the sea water out and sub returns to the surface. It maneuvers using its rudder and planes. A link is provided.