answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Can you use locktight on your engine oil plug?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What size of tool to unscrew the oil drain plug on?

It seems to me I use a 15 mm wrench to remove the engine oil drain plug.


Where is the oil drain plug in a Lincoln ls?

I had to use an oil sucker that sucks the engine oil out from the dipstick hole. I could not locate the drain plug under this car.


When is Honda Insight maintenance required?

3000 mile oil change. Oil filter located below dip stick on the front of engine and plug is on the back of engine accessible from the top of the engine. Make sure and use new washer on the oil plug and use 0w- 20 w available at Honda


What type of engine oil do you use for Toyota Camry CE 2001?

It must be 5W30. Also you can find information about it in the owner manual and on the oil plug of the engine.


What happens if you use 4stroke oil in a 2 stroke engine?

It will probably just foul the plug or wreck the engine because the oil is not designed to mix with the fuel and will not lubricate the motor.


Where is the engine oil drain plug on a 2007 Chrysler Pacifica?

It is on the back side of the oil pan. Use a thirteen mm wrench to remove it.


What transmission fluid does ducati motrcycles use?

Ducati engines are unitized designs, meaning that the engine and transmission use the same oil and oiling system. There is no separate drain plug nor oil fill for the transmission and engine.


Where is the 'oil plug' for changing oil on the 3.5 craftsman edger 536.772100?

The oil drain plug is located on the bottom of the engine underneath the edger. It takes 20 ounces of SAE30 weight oil. I recommend you use synthetic oil in any air cooled engine. Change the oil every 25 hours. Click the link to download an owners manual.


How do you change oil in a 1985 Yamaha 200 tri moto three wheeler?

Locate the oil drain plug on the bottom of the engine. Put an oil pan or similar beneath the engine to catch the old oil. Loosen and remove oil drain plug. Then when the oil has drained out, insert the plug again and tighten it in place. Open the oil fill plug located close to the brakes on the right side of the vehicle and pour the new oil in. Oil capacity is 0.85 quarts. Use a 15-40 W SAE SF or SG grade oil.


How do you change the oil on a 1999 cavalier?

Remove oil plug, drain sump, catch oil into suitable container, reinstall oil plug, use new washer, remove ols oil filter, coat new oil filter seal with oil, install new oil filter, pour new oil into engine, disable ignition, crank engine on starter until oil pressure light goes out, top off oil level, enable ignition, start engine.


Can you use gas engine oil in a diesel engine?

No you can not use gas engine oil in diesel engine oil because processing of diesel engine is different from gas engine oil. If you use this then it damage your vehicles.


Where is the oil drain plug on 2000 Mercedes s430?

lift your car and take out the 4 screws of the engine cover (black plastic) right beneath the engine. The dain plug is situated on the left side. Use no. 13 close wrench on the drain plug.