You will not damage the engine but you can damage the radiator if you use any high pressure. If you only flush and apply no pressure you will do no damage. Use a chemical flush and a water hose and you will be safe.
No they are completely different. A engine flush will only clean the engine a transmission flush will only clean the transmission. These two components use two different kinds on fluid therefor they can not be mixed together.
Using Naphtha in gas power plants has many advantages. Among the most prominent advantages include the ability to use the Naphtha for longer periods of operating time and it costs less.
MOPS stands for Mean of Platts Singapore... MOPS Naphtha is Singapore Naphtha. Japan Naphtha is MOPJ Naphtha.
can crack the engine.
Do you mean flush the oil (not recommended) or flush the coolant?
Use a garden hose and a readily available flush/fill kit from auto parts stores. Procedure is not difficult and outlined in the instructions.
you do not want air enter into the naphtha tank and mix with naphtha vapour.
Not far, anyway. The engine flush is not engine oil ... its only purpose is to, hopefully, clean the inside of the engine areas. That's why it's called "Engine Flush" and not "Engine Oil". Get it out and put the new oil in soon.
Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils. We recommend cleaning the engine interior with Engine Flush before every oil change.
can i clean sticky tape from hard pepper with naphtha
Naphtha is used as a Rubber Solvent. It is not in rubber.