0
Yes you can use.
PC means DDR1 266mhz ram, PC 2700 means DDR1 333mhz ram. you should not use in combination of both PC2100 and PC2700 because due to Bus frequency mismatch some boards will not support.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Will 184 pin PC2700 ram work in a PC2100 slot?
ddr266/pc2100 and ddr333/pc2700 are interchangeable.
What if your PC requirement is DDR 333 can we use DDR 400?
no you can not use 400 MHZ ram because (PC2100 @ 266 MHZ ddr) and (PC2700 @ 333 MHZ ddr) are the only chips that are inter changable. PC3200 is 400 MHZ but it has 2 slots not just the one. It does not fit into the same type slot as either PC2700 or PC2100. I was looking at the possibility of a PC2700 ram rated at 400 MHZ but I do not think there is such a thing.
Is PC2700 memory compatible with G4 1.2 GHz iBook?
Yes. However, it will run at PC2100 speed.
Is there a noticeable difference between a pc2700 ddr ram and a pc2100 ddr ram?
You wouldn't notice the difference if you are just doing casual computer use, for example: Internet Browsing, listening to music, or word processing. However, if you are playing graphically intensive games, then you would notice a difference. The higher the PC number (PC2100, PC2700, or PC3200) then the better it is. Just be sure to buy the memory that is compatible with your motherboard... that is if you are planning on buying memory.
How much will performance be degraded if you install PC2700 DDR RAM on PC3200 Mother Board?
The 3200 rating on the MB is just the ram limit you can put just about any speed you want in the board, depending on the speed ram chip you buy is the speed you will get. also know that is you use more than one stick of ram and they are different speeds ex. 1 256mb of pc2700 and 1 256md pc3200 the board will limit the ram speed to the slowesed chip meaning that you ram would acualy be running at the pc2700 speed even thow you have the pc3200 chip in the board ! have a good day
What type of memory does an eMachines T3042 computer use?
DDR333 PC2700
Is it possible to use pc4200 ram in a laptop designed for pc2700 ram?
no
Can pc2700 ddr-ram for notebooks be used in a notebook designed for pc2100 ddr-ram?
Depends on the notebook motherboard..I just upgraded my note book from 512MB RAM (2X256 PC2100 DDR-266Mhz 200 pin SODIMM) to 1GB (2X512MB PC2700 DDR-333Mhz 200 pin SODIMM), would not accept 1GB modules. I tried the Brand supplier (HP) and they were going to charge me a fortune for the PC2100 modules, so I got my local computer shop to get generic memory for me from their suppliers. When I tried the first memory modules of 512MB my notebook did not boot, so tried another brand (generic as well) and you little beauty it loaded. Therefore, different brands of memory modules may not work, mainly due to the voltage of the chip. So I saved big bucks by going local. My advice, seach the internet for your model and product ID and the type of RAM used. Hope this helps Kevin from Australia
What type of computer would likely use a PC2700 SODIMM module?
A laptop or notebook
What is the RAM speeed you have to select for a P-4 processor?
Processor Type is not important when selecting memory. It's the FSB (Front Side Bus) speed that's important... FSB400 PC3200 FSB333 PC2700 FSB266 PC2100 If you have a processor with a 400MHz FSB, then you need a Motherboard which supports a 400MHz FSB. You then select the appropriate memory.
How much does a PC2700 1GB card cost?
The PC2700 1GB card costs around twenty dollars. A PC2700 1GB card can be purchased online from sites like amazon and ebay, and stores like Best Buy have them for sale.
What computers take pc2700 ddr?
A lot.
