No
What schedule 10 ,20, 40, 80, 120????
if your stool is black then there is alot of iron in your system. those who take iron tablets, their stools are black.
http://www.ipspipe.com/Documents/Spec/Pipe_pressure_rating.pdf
What medium and temperature as there is something called "pressure temperature relationship"
Schedule 40 and schedule 80 have the same outside diameter (OD). The wall thickness is greater on schedule 80 than it is on schedule 40. So on schedule 80 the inside diameter (ID) gets smaller.
Through cast Iron radiators and copper tubing and schedule 40 black steel piping
Yes and it can be schedule 80 and schedule 120
Yes. = Iron Man 2 is schedule to be release on May 7, 2010. =
Big Iron can schedule a variety of different times for separate guns and ranges. Some locations are operating twenty-four hours a day while others are open mostly in the afternoon.
Schedule 10 , 40 and 120
Pipe ratings are the operating pressures that a pipe can be constantly operated at. There are a few classes of Plumbing pressures. Schedule 40 black iron is 150 psi class, meaning that the "operating pressures" are 150 psi. The 300 psi class is the class for most schedule 80 black iron (no seam [welded]). Each class has it's own fittings at the same ratings. The fittings wont be listed as a schedule just a class or a psi rating. Other ratings can exceed 3000 psi for hydraulic actuated machinery applications. Again, these classes have there own set of 3000 class fittings which are usually forged instead of cast. The ratings include a safety factor of 2 and an extra surge allowance of 100 psi for very short term operation. The rating only goes to the yield strength of the pipe not the failure strength, know the difference. So the burst pressures someone else gave as the pressure rating (2700 +psi) is wrong unless the person asking this question was trying to make a "pipe bomb."
Pipe ratings are the operating pressures that a pipe can be constantly operated at. There are a few classes of plumbing pressures. Schedule 40 black iron is 150 psi class, meaning that the "operating pressures" are 150 psi. The 300 psi class is the class for most schedule 80 black iron (no seam [welded]). Each class has it's own fittings at the same ratings. The fittings wont be listed as a schedule just a class or a psi rating. Other ratings can exceed 3000 psi for hydraulic actuated machinery applications. Again, these classes have there own set of 3000 class fittings which are usually forged instead of cast. The ratings include a safety factor of 2 and an extra surge allowance of 100 psi for very short term operation. The rating only goes to the yield strength of the pipe not the failure strength, know the difference. So the burst pressures someone else gave as the pressure rating (2700 +psi) is wrong unless the person asking this question was trying to make a "pipe bomb."