Want this question answered?
Generally is possible, but this strongly depends on the type of use. For example soaps with NaOH are solids and soaps with KOH are liquids.
Very Carefully! :) Use dilute acid.(the process is faster when you use strong acid). Attention: Use proper googles and safety globes.
As posed, your question has no obvious meaning, particularly "biological effectiveness". Benefit is also a relative term, you have to compare to something else. What? Also, precisely what use had you in mind? Caustic soda has very many uses.
Combination of water and caustic soda for improving the resistance in starter, that's called Liquid Resistancestarter.If any slip ring Induction motor, at the time of startinggiven the external resistance required to rotor side, why because starting current and starting torque is very high.So we are using resistance starter depend on motor capacity , at that place using Liquid resistance starter.Liquid resistance starter (LRS) ,IN which externalresistance is liquid media which is use for the startingmethod of slip ring motor. For starting of slip ring motor external resistance arerequired so that we use liquid (addition of some causticsoda)as resistance so that is called as LRS.
Why do you need costic soda? Be extremely careful with this stuff - it's bad and not too forgiving to the skin or eyes. Ken
No. There are computer controlled systems, systems that use a slip clutch,
There is no such thing as caustic acid - caustic soda - YES. Caustic potash - YES - but not caustic acid
He is hurt when he heard her caustic remarks of his shoes
The caustic fluid splashed over my hand making me yelp with pain. He had caustic words for the negligent operators of the nursing home.
You will want to use potassium hydroxide.
No, use the thinner recommended on the paint can, or hot, soapy water. I don't ever recall seeing caustic soda mentioned in this context.
There is caustic stress corrosion cracking when carbon steel is exposed to concentrated caustic solution. Caustic SCC is driven by tensile stress, susceptible material and concentration of caustic. So, lack of PWHT will increase susceptibility also hardness and residual stress that is the more significant factor in caustic corrosion. Thanks and Regards Abdul Khaleem Abdul Razak
Generally is possible, but this strongly depends on the type of use. For example soaps with NaOH are solids and soaps with KOH are liquids.
Very Carefully! :) Use dilute acid.(the process is faster when you use strong acid). Attention: Use proper googles and safety globes.
You use the betting slip at the sumo wrestling rink when it is open.
I'm a chemist waste water operator and we use caustic soda to raise pH levels and sulfuric acid to lower pH levels
RING TYPE JOINT FLANGE The ring type joint flange metal is used for leak proof process. It is a part of steel. Sometimes the pressure becomes high at that time the ring type joint flange is using. A metal ring is compressed like a seal helps to high-pressure leak proof. THREADED RING FLANGE In threaded ring flange welding is not needed. It is threaded or screwed into another. It is used in low pressure and it can connect only with other threaded material. LAP JOINT RING FLANGE Lap joint includes a stub end or taft. The lap joint is very easy to assemble and align because it is used in low pressure only. A hub is included in a lap joint ring flange but some will not provide to reduce the cost. BLIND RING FLANGE Blind ring flanges are not connectors they are like stoppers. Blind ring flanges are blank because they are used in the end or fitting for periodical inspection only. SOCKET WELD RING FLANGE In socket weld ring flanges the bore of pipe and the flanges both are same, it helps to provide the good flow. The receiver pipe also bored because the socket weld flange and the receiver pipe should tighten. WELD NECK RING FLANGE In weld neck ring flange the boring area and the flanges must be matched to avoid problems inside the pipe. In critical applications the weld neck is durable. SLIP-ON RING FLANGE The slip-on ring flanges don't have neck, it only has a molding area to fit with the pipe. In fabricated applications, the slip-on ring flange is very easy to use. for more check jfindustries