answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2008-12-29 21:39:34
2008-12-29 21:39:34

Yes you have to be a little more careful that you don't expose the vinyl to strong concentrations of chemicals as this may cause discolouration.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Installers use vinyl liners to create inground pools without pouring concrete. Here's an overview of the topic http://www.poolandspa.com/page232.htm.


Inground concrete or fiberglass are the easiest pools to maintain. When you get into synthetic materials like vinyl and plastic, it's harder to find chemicals that will do the work without damaging the pool.


Garret Vinyl Pools Inc. 281-855-7000


There are three main types of inground swimming pools: concrete, vinyl and fiberglass. All of which are prone to the occasional crack. Luckily for the homeowner such cracks can be repaired. If you are handy you can purchase a do it yourself repair kit at your local pool specialty store.


We used Garrett Vinyl Pools they have been around for years.


An inground pool is typically lined with either gunite (concrete), fiberglass, or vinyl. Gunite and fiberglass are roughly the same cost, whereas vinyl is considerably cheaper. With the lower price comes less durability, as vinyl lining has to be replaced every 8-10 years or so, whereas the other two can last for decades. Vinyl is also much easier to puncture or otherwise damage. That said, many people still prefer vinyl inground pools due to the lower cost.


Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand


Purchasing a pool is a large investment for any homeowner. There are several different types of inground pools available, so selecting the right one can be a challenge. Currently, fiberglass, concrete and vinyl liner inground pools are being sold. Comparing each type can make buying a pool much simpler. Fiberglass inground pools are a great choice for pool buyers. They are pre-constructed at a factory and shipped to the desired location in one piece. A customer simply selects their preferred size and shape from a catalog. Fiberglass pools are typically the most expensive pool on the market, but they last the longest. In the long run, a fiberglass pool will require less repair and fewer chemicals than other pool types. It usually takes only a few weeks to install a fiberglass pool from start to finish. The inside of fiberglass pools is smooth to the touch. For homeowners that desire more freedom designing their pool, then a concrete one would be the best option. Concrete inground pools are currently the most popular on the market. They are custom created by pool builders, which is great for customers who have a difficult yard shape. Concrete is usually less expensive than fiberglass, but requires more care over the years. Unlike fiberglass, a concrete pool is built in stages, so the construction time tends to be longer, usually one to three months. These pools come with a wide variety of finishes, from rough plaster to smooth tile. Less popular are vinyl liner inground pools. These pools are typically sold to the consumer in a kit form and put together by the owner. First, the ground must be excavated to fit the pool, and then it is placed inside. The sides of vinyl liner pools are constructed from steel. Once erected, they will be permanently supported by concrete. A vinyl liner is then spread over the sides and bottom. These pools are very popular in parts of the country where there are cold winters, as they can be easily drained and covered until the weather warms back up. Swimmers enjoy the smooth surface of the liner, but it can accrue more damage than other pools types.


I am a big fan of Fiberglass pools. I have had vinyl liner pools and concrete pools. Fiberglass pools are easy to clean, they manitain chemical balance better, and the surface does not need to be refinished as often as concrete pools. The only downside is that the surface of fiberglass pools can be a bit more slippery than concrete but that has not caused any problems for us.


The walls of some above ground and some inground vinyl liner pool kits are made of aluminum.


Some pool companys are not in business. most all inground pools have the same size treads..


Purchasing a pool is a large investment for any homeowner. There are several different types of inground pools available, so selecting the right one can be a challenge. Currently, fiberglass, concrete and vinyl liner inground pools are being sold. Comparing each type can make buying a pool much simpler. Fiberglass inground pools are a great choice for pool buyers. They are pre-constructed at a factory and shipped to the desired location in one piece. A customer simply selects their preferred size and shape from a catalog. Fiberglass pools are typically the most expensive pool on the market, but they last the longest. In the long run, a fiberglass pool will require less repair and fewer chemicals than other pool types. It usually takes only a few weeks to install a fiberglass pool from start to finish. The inside of fiberglass pools is smooth to the touch. For homeowners that desire more freedom designing their pool, then a concrete one would be the best option. Concrete inground pools are currently the most popular on the market. They are custom created by pool builders, which is great for customers who have a difficult yard shape. Concrete is usually less expensive than fiberglass, but requires more care over the years. Unlike fiberglass, a concrete pool is built in stages, so the construction time tends to be longer, usually one to three months. These pools come with a wide variety of finishes, from rough plaster to smooth tile. Less popular are vinyl liner inground pools. These pools are typically sold to the consumer in a kit form and put together by the owner. First, the ground must be excavated to fit the pool, and then it is placed inside. The sides of vinyl liner pools are constructed from steel. Once erected, they will be permanently supported by concrete. A vinyl liner is then spread over the sides and bottom. These pools are very popular in parts of the country where there are cold winters, as they can be easily drained and covered until the weather warms back up. Swimmers enjoy the smooth surface of the liner, but it can accrue more damage than other pools types.


Wood wall pools will often deteriorate faster than traditional galganized steel wall vinyl pools. Vinyl pools are the most economical where as concrete pools tend to be more luxurious. If you want to see a side by side comparison of all different types of swimming pools you can choose from at www.BuyPool.ca which is an article comparing the purchasing quality of: -Vinyl liner abover ground pools -Vinyl liner in ground pools -Concrete or gunite in ground pools -Fibreglass pools


I am a builder and have installed probably 350 inground vinyl lined pools we usually put our decks around our pools before filling of the water mostly due to the fact that concrete decks upto or cantilevered over the edge can be messy so I would have to answer your question asap


Steel walls are currently the lowest quality wall for a swimming pool, with the exception of Cyprus wood (if still available). Concrete (not gunite) is superior to any other wall, but a pool with concrete walls generally also has a concrete bottom. In other words, it is a concrete swimming pool. The most popular wall today for vinyl liner pools is fiberglass and, with the possible exception of concrete, is the best possible choice.


The in-ground pools are prefabricated. The bodies are made of fiberglass-reinforced plastic. This is an alternative to vinyl-lined, gunite and poured concrete pools.



Swimming pool types include above-ground pools, fiberglass pools, vinyl-lined, gunite and poured-concrete pools. Learn the pros and cons of each type of pool.


All depends on what you are looking for and how much you have to spend. Concrete pools are usually considered the "high-end" pool but installation takes a long time and maintenance and repair are costly. Steel pools, or I'm assuming you're referring the vinyl liner pools, are a good, cost efficient option. Though, if you want to extend the life span of your pool, check out the other building materials used for vinyl liner pools.. such as Fiber Reinforced Composite Materials.


Inground vinyl is better, their is less exposed part to the oxigene, therefore, last longer.


All day long. Concrete pools have real tile instead of the fake liner tile look. You can update a concrete pool later on as styles change: with vinyl it's final.


Some of this is opinion (thus subjective) and some depends on some variables like location and what features you want. In areas that have winter and freezing weather typically vinyl lined pools tend to be more popular as the freezing can cause concrete to crack over a few season and cause costly repairs. There are some options, like vanishing edges, that are easier (and cheaper) to do with a concrete pool that make that a better option for some.


Once you’ve decided to budget the money for a swimming pool, you want to investigate the benefits of inground pools to see if this style of swimming pool construction will give you the best return on your investment. Depending upon budget, inground pools can be fashioned from concrete, vinyl liners or fiberglass. Having an inground pool not only provides hours of entertainment, enjoyment and exercise for family members, friends and guests, it also adds to the resale value of the home when the homeowner decides to sell the property. Unlike above ground pools, inground pools represent a permanent improvement to the property which can be enjoyed year-round. Unlike above ground pools which are limited as to the depth of water they can offer, inground pools can be designed to safely accommodate diving into deep water. While the size and shape of above ground pools is limited to circular and square designs, inground pools can be custom built in a variety of shapes and sizes, including kidney shape, rectangular and L-shaped. Inground pools are much easier to landscape, allowing them to fit into the environment rather than sticking out like a sore thumb. It is easy to put trees, shrubs and other landscaping around pool borders to offer some privacy protection as well as a wind break. Inground pools can become the focal point of a backyard designed to look like a tropical resort or getaway. It is also easier to put a security perimeter around inground pools via the use of locked fencing so that unwelcome guests or intruders don’t put the homeowner at the risk of liability by using the pool in an unauthorized fashion. Inground pools can be quite easy to maintain because many automatic cleaning features can be built into the pool, including a cover that automatically closes into place after use to prevent accidents as well as to keep leaves and other flying debris out of the pool water. Inground pools can represent a substantial investment, especially if they are landscaped and include special features like adjacent jacuzzis and waterfalls. But the return on the investment for the individual or family that enjoys swimming often and year-round is much greater on inground pools.


IF BOUGHT BRAND NEW IT SHOULD HAVE COME WITH A PATCH KIT. IF NOT YOU CAN PURCHASE ONE FROM A POOL SUPPLY STORE OR ANY STORE THAT SELLS POOLS.


The experts at Advanced Pool Coatings have been installing fiberglass coatings over vinyl liner pools for over 30 years. You can read more at: http://www.advancedpoolcoatings.com.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.