yes, but you still have to add 2-stroke oil unless you want to burn the engine up.
In the two stroke petrol engine as you know suction,compression,ignition,expansion and exhaust is completed in only two stroke and one revolution of crank wheel more over diesel ignites at very high pressure which is not the same in case of petrol........if petrol is also ignited under pressure it explodes producing a big thumping sound.called KNOCKINGthis may reduce the power output and also lead to breakdown of the engine. For the above reason two stroke engine cannot compress air and ignite the fuel like diesel engine.
suction stroke and exhaust strokes are the two strokes involved in 2 stroke engine....
A diesel engine is an internal combustion engine which uses the heat of compression to ignite the fuel/air mixture in the third stroke of the 4-stroke cycle, while the petrol engine is an internal combustion engine which uses an electrically-generated spark system to do the ignition. Diesel engines have a higher efficiency compared to petrol engines. In simple terms this means diesel engines can give 50% or more miles per gallon than petrol engines.
In my point of view two stroke engine is the best engine ,because in two stroke engine there are only two stages or two stroke .In which one stage complete the two process frist is suction & second one is compression ,in these two process completes in one stage. The best advantage of this engine is the in every cycle there is a power stroke due to which the engine performance is very good . But the biggest disadvantage is the fuel consumption . Which after some time reduced by the resarcheres.
valves are use in four stroke engine, and ports are use in two stroke engine.
Yes its using petrol unleaded while two stroke using two stroke oil
No it isn't fatal, but it would smoke quite a bit, because a two stroke engine needs two stroke oil mixed in the petrol, and a four stroke just needs petrol.
two stroke diesel engine is used in cargo ships as cross head type engines, two stroke petrol engines used in two wheelers.
Failing to mix oil with the petrol is a common one.
Petrol, carburettor Petrol, fuel injected Both can be normally aspirated or turbo charged Petrol two stroke Diesel, Normally aspirated or turbo charged Diesel, two stroke Rotary engine.
Ordinary 87 gasoline, the same you put in a car. It depends if it is a four stroke or two stroke engine. If the engine has a separate filler for oil then plain petrol will do. If there is no separate filler the 25 to 1 petrol /oil mix should be OK.
normal unleaded fuel mix depending on manufacturers specs some 25-1 some 30-1
Probably however the oil is usually only in the petrol with a two stroke motor.
well about 487.9 and 1/2 years
you dont mix water with oil. If you have a two stroke engine it needs oil and petrol in the tank or it will just die on you. But if you have a 4 stroke you just put petrol in the tank. Hope this helps.
Two stroke engines are lubricated by mixing special two-stroke oil in with the petrol.
Well the first necessary piece of information I would need to know is: Is it a two stroke or four stroke engine? I assume its four stroke as I'm sure you know that you need to mix two stroke oil with petrol and then put it in the tank if it's a two stroke. In that case, 25 to 30ml of two stroke oil to a litre of petrol is perfect. On the otherhand, if it is a four stroke, 300-400 ml of oil should be about right.