Typically, that indicates that the brake interlock is non-functional. A few cars will not shift out of park unless you are holding the brake. Most new cars will not shift into park unless you hold the brake. It could also mean that your locking pawl is bound up because you are parked on a hill. If that is the case, you can enlist the help of some friends to push or rock the car back and forth while you try to shift, That takes the load off the pawl and un-binds it. If you find that to be the problem and you have no choice but to park on the hill, avoid it by setting the hand brake before you shift into park.
footbrake deactivation switch
Into Park or out of Park?
No. You cannot shift your obligation for support to the child.No. You cannot shift your obligation for support to the child.No. You cannot shift your obligation for support to the child.No. You cannot shift your obligation for support to the child.
its probably your brake light switch. jiggle the little sensor connected to the top of the brake pedal.
If you do not have your car turned on the vehicle will not shift out of park. You also have to have your foot of your brake.
If your Mercedes won't shift out of park, you might have an issue with the brake sensor or the brake itself. The brake must be fully depressed in order to shift from park to drive or reverse.
why is my 2006 Nissan altima gear shift stuck in park
Check to see if the brake lights are working - shift interlock is same circuit Check fuse Try moving key to 1st position (unlock) shift to neutral to start car and then shift to Drive
Many vehicles are equipped with a safety mechanism that requires you to press the brake pedal in order to shift out of park. Sometimes the release switch on the brake pedal wears or otherwise becomes out of adjustment, sometimes the switch fails and sometimes the release solenoid fails.
gear shiftner will not move out of park
Depress the brake pedal to shift.
its going to be some were on the tranny a small metal rode is going to be connected to the park/shift solenoid and that metal rode runs throw and connects to your shift handle inside the car/truck