To change the belt on a GE profile washer, remove the back panel with a nut drive or a screwdriver. Turn off the water faucets and disconnect the water hoses. Then remove the old belt and replace with a new one. Reconnect the water hoses, put the back on, and turn on the water.
That depends on your skill level. I'd say it's fairly hard for most people. Hiring someone to fix it is better.
That is a cheaper alternative to buying a new washer.
Since direct drive motor is a more complex part of a washing machine, it is better to let it be handled by an expert. Its mechanisms are unlike that of a belt-driven washer. You should have it checked by a repair man. Most direct drive washers have longer warranty on the motor. Check your model of washer and find out if it has a longer warranty.
No but trying to drive with a window you can not see out of is illegal.
Do not drive it until the fluid is changed.
A windshield washer pump on a 1998 Dodge Avenger ES is screwed onto the bottom of the washer fluid canister that holds the washer fluid.
Just resave the file. The flash drive is represented as an ordinary file system. If you can change the date of a file on a hard drive, then you can change it on a flash drive.
you would need to change the differential gears to change the gear drive.
You could drive the car to florida or add some salt to the tank, that will melt the ice, then add washer fluid that is temperature rated for your area, so it won't refeeze.
There could be a problem with the belt drive of your washer. Manually turn the machine to see if it spins easily. If it does not, you might need to check the belt. It could be too tight or too loose. But that depends on your washer. You can refer to http://www.washingmachineadvisor.com if you do not know how to repair your brand of washer.
Under, in, or near the coolant reservoir.