In order to calculate amps. you will need to know at least two other values pertaining to the circuit in question using Ohm's Law. Basically, amps can be calculated by either Watts divided by Voltage, or the square root of Watts divided by Resistance. Since you expressed your question in Kilowatts, multiply that value by 1000 to convert to watts.
The equation you need to find amperage when kilowatts are known. Amps = kW x 1000/1.73 x volts x PF. Use .9 as a Power Factor constant.First megawatts must be changed to kilowatts. 1000000/1000 = 1000 kilowatts. Amps = 1000 x 1000/ 1.73 x 480 x .9 = 1000000/747 = 1338.6 amps.
You don't. Othewise your local power company could charge you for 1,000,000 kilowatt hours of electricity used by your 120 volt outlet that doesn't have anything plugged into it.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Seven amps pulls zero kilowatts . W = A x V. You need to state a voltage to multiply the amperage by to get watts. Then divide by 1000 to get kilowatts.
750 watts per horse power20 x 750 = 15,000 watts / 220V = 68A68 amps at 220 volts
P, the power in kW (kilowatts) is related to V (the supply voltage) and I (the current in amps) by the Power Law: P = V x I So, to get the current: I = P / V If you have something that uses 5 kW (which is the same as 5000 watts) and the source voltage is 120 V, then the current drawn in amps = 5000 / 120 = 41.67 amps.
Amps is a measure of current flowing in a circuit. Volt-Amps or (VA) is a measure of power and is equivalent to wattage for a pure resistive load.
A three wire home distribution service rated at 100 amps has a wattage capacity of;From L1 to L2 at 240 volts x 100 amps = 24000 watts or 24 kilowatts. From L1 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts. From L2 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts.
If you believe the 100 watt spec then it consumes .1KW. If you believe the measured amount then .1284 KW.
There are zero kilowatts in amps. A voltage value has to be supplied before an answer can be given. I = W/E. Amps = Watts/Volts = 12000/Volts. Alternatively, you could state the resistance, from which the amps are determined from P/R = I2.
Depends on the battery. It is listed on the battery as Cold Cranking Amps (CCA).
Add another leg of 120 to a three pole breaker.