Take out the plastic lens cover using a small screwdriver. Once removed change the bulb and click back the lens cover. (Bulb W 5 W).
Check this link for photo and instructions which will help: http://citroenc3owners.com/Citroen-c3-tips/topic30.html
A backplate is a plate protecting the back of a person who is fighting, or the metal plate on the rear of the casing of a computer.
Remove two rear lamp bolt/screws from rear license lamp. Remove lacense lamp from rear bumper fascia. Remove license lamp bulb and socket from rear license lamp. Replace bulb and install using reverse procedure.
how do i change rear brake pads on 53 plate Picasso hdi
how do you change the rear light of a c5 citreon estate? I have reversed into somthing and the top half is bocken
# Remove rear combination lamp mounting bolts. # Pull rear combination lamp to remove from the vehicle. # Disconnect rear combination lamp connector. INSTALLATIONInstallation is in the reverse order of removal.
which one? front, rear, side?
Most stores sell the complete hub assembly. This provides all parts and instructions needed to change the rear bearings on a Citroen C2 Vtr. It can be tricky, though, so one may want to enlist the help of a professional.
# Release decklid latch and open decklid. # Remove trunk lining from rear closure panel as necessary to gain access to tail lamp fasteners. # Remove nuts attaching tail lamp to rear closure panel. # Remove tail lamp from rear closure panel. # Remove socket(s) from tail lamp unit. # Pull lamp from socket.
citroen saxo 1.4. what is the rear brake hub torque setting?
Take the old one out, and put the new one in
From the rear trunk, remove carpet strip behind the lamp by unscrewing 2 plastic discs. You can then see the black plastic bulb holder assembly. Pull down on the black plastic tab on the lamp holder to release it. The complete lamp holder can then be gently guided out of the rear lamp assembly.
Just open the three studs in the center of the wheel and it should come right off.