On the inboard lights, take off the licence plate and stick your arm, if it is small enough, up and to the port or starboard side. rotate the housing counter clockwise, pull it out, and remove and replace the light. On the outboard lights, stick your arm up between the muffler and the rear quarter panel on either side and use the same procedure as on the inboard lights. This is the proper way, but after breaking one out board light, mashing the rest of the bulb, and blowing a fuse, I let my mechanic do it. He also has smaller arms and can get in easier.
Remove tire and inner fender well and change it from there. Other option is to remove the licence plate and reverse lights,reach through to the tail lights.
what light?! head light, tail light, parking light, rear view mirror light, rear hatch light, underhood light, etc.
remove tail light and reach through
No the early C4 lights are round and the 92 has the ZR1 oval lense.
how to change tail light bulb on Toyota sequoia
How do you change the tail light on a 2001 toyota sequoia
The tail lamps are serviced from underneath the vehicle, between the frame extension and rear bumper.
I have a 1988 and I answered in this forum before about changing the tail light and I think it is the same with the 85, The problem is the space is so small the average person's arm will not fit to get at the light. I used my 14 year old son whose are was alot thinner than mine and he was able to reach up and change the bulb. He had to squeeze his arm up until he could reach it it is a very tight spot.
not sure not sure
Remove license plate, dissconnect backup light wire, remove bolts to backup light, pull backup light sideways, reach hand to tail light, twist socket.
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
If it's like my 88 remove license plate, remove wire to backup light, pull backup light assembly straight out (sideways), reach hand to taillight socket, twist socket and remove.