Check:
Yes, if the spark plug wires can be connected to the distributor and works.
you have backfire bacause you forgot to match wires with right cylinder
with much difficulty, i did it today and have bruises and scratching that will last a week!
To change the spark plugs in a 2001 Ford Windstar, first, ensure the engine is cool and disconnect the battery. Remove the engine cover, if applicable, and locate the spark plug wires or coil packs. Carefully disconnect the wires or coils, then use a spark plug socket and ratchet to unscrew the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, and reconnect the wires or coils before replacing the engine cover and reconnecting the battery.
Does it turn over? Does it have spark? Does it have fuel? Does it have compression?
Yes, absolutely!See "Related Questions" below for much more about changing Windstar plugs and wires
I would replace the spark plugs after 50K, the wires and plugs again at 100K.
You will see wires right on top of the motor. You can easily follow these wires to the spark plugs.
spark plugs of spark plug wires. i had the same problem and i changed my spark plugs to the e3 ones and my spark plug wires to the msd 8.5mm wires and i haven't had the problem any more.
The most common reason for a vehicle to run rough when it is cold is bad spark plugs or bad spark plug wires. Change the spark plugs and spark plug wires.
I'm not a mechanic but it sounds like there has been a mixup involving your spark plug wires , either at the coil pack or at the spark plugs
A 1998 Ford Windstar has the Electronic Distributorless Ignition System ( EDIS ) so there is no distributor . It uses ( 1 ) coil pack that has ( 6 towers ) for the spark plug wires