Serpentine Belts
Chevy Trailblazer

Changing a serpentine belt on a 03 Chevy Trailblazer?

91011

Top Answer
User Avatar
Wiki User
Answered
2009-02-05 12:37:01
2009-02-05 12:37:01

Relieve the tension by putting a wrench on the tensioner and then remove the belt.

www.trailvoy.com all the answers for your Trailblazer from true enthusiasts!

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


need help changing the belts on my Chevy trailblazer lt 2003



You can change the serpentine belt on your Chevrolet trailblazer, by loosening the tensioner pulley. With the loosened tensioner pulley the belt will come off easily. Tighten the new belt with the tensioner pulley.


Serpentine belt. Easy to replace and belt routing is displayed in the engine bay. Get more info with a complete question at www.trailvoy.com


Replace serpentine belt on Chevy avalanche?HOW


Put a wrench on the tensioner. Push it slack. Replace the belt while holding the tensioner in the slack position.


The serpentine belt is replaced by relaxing the tensioner arm using a big wrench or screwdriver. Then pop the belt off and slide the new one on. www.trailvoy.com Trailblazer enthusiasts with all the answers!


serpentine belt for 97 7.4 454 Chevy truck


need diagram for 1994 chevy truck serpentine belt?


Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.


How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?


Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.


No belt. It has a timing chain.


The tensioner is the arm on the passenger side of the engine near the front that has a pulley on the end and controls the tension of the serpentine belt. www.trailvoy.com


How do I rethread the serpentine belt on a 2002 Malibu with a V-6?


The serp belt has a spring tensioner. It is not adjustable. To remove the serp belt simply put a wrench on the nut and push it inward to create slack in the belt. Then slip it off.


Visit our enthusiasts forum at www.trailvoy.com


Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.


The 2002 TrailBlazer with the 4.2 Inline 6 uses a serpentine belt. The tensioner pulley and arm can be "relaxed" using a breaker bar or a wrench on the tensioner pulley to make is slack. www.trailvoy.com All the answers are in our enthusiasts forum!


put a wrench on it as to tighten the bolt. That will release the tension. You can also push down on it but that will require a second person to remove the serpentine belt.


changing serpentine belt and pulley 90' sedan deville


usually serpentine belts get their tension(tightness) from the belt tensioner


how to release serpentine belt tensioner on 1991 C1500 Chevy Silverado?


You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.


Remove the serpentine belt. Undo the electrical connectors Undo the bolts on the alternator If you need more help visit our enthusiasts forum www.trailvoy.com



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.