Hi there, I had the same problem trying to replace a bulb but struggled. You need a screwdriver to place between the yellow inddicator & bonnet. The yellow indicator should just snap out of position, then you'll see the screws.
changing rear light bulbs on toyota avenis
Remove the light assy then turn the bulbs countereclockwise to remove the bulbs.
Take the light assy off of the car then turn the bulbs counterclockwise to remove them.
Check the tail light bulbs. These bulbs do double duty. Thet are both the tail light & the brake light. Tail light part might be burnt out.
one of the light bulbs in the rear of the car is out.
Depending on the year but most late modles have the bulbs screw in fron the rear. Sometimes you have to remove the light assy .
Have you checked the rear bulbs to see if they are out? If not then it is probably not what that means.
To replace the rear bulb in a Toyota 4Runner remove the plastic covers located in the trunk. Taking off the plastic covers will reveal the taillight housing and bulbs. Replace the bulbs.
make sure your bulbs are in the right way(tail light bulbs are polarity sensitve). Just remove the bulbs and twist them in the other way(you can do this with the lights on to check if the bulbs are good). Also, I know this is kinda simple, but check to make sure you plugged them back in (I've done it!)
It can be connection wires, bulbs or fuses.
Changing a rear license plate light on a 1991 Toyota Corolla will be very easy to do. You need to take the license plate off and then unscrew all the plastic screws holding the light cover in place. After the screws are out, remove the cover and unscrew the old bulb and replace it with a new one.
If it's the brake light in the boot lid then you have to take the cover off the inside of the boot lid and then you will have access to the light bulbs. If it's the brake light in the rear quarter panel then you open boot lid and unscrew the two bolts holding the light cluster and slide it backwards, then you will have access to the bulbs