No, it takes a special drill bit with a hardened tip.
A 40mm masonite drill bit could work using the right drill. But consider using a coring machine instead because its concrete.
Use a masonry drill. If you are drilling a large or deep hole, you can use a hammer drill with a special bit. If the hole is very large, you can rent or hire someone to do concrete sawing.
A good drill is important for use on concrete walls, but the bit you use can be just as necessary. A hammer drill with bit that has a carbide or diamond tip would be a good recommendation, remember that using goggles is vital because of the concrete dust.
To drill into concrete or brick you need a heavy-duty electric drill with a low speed. You will also need the right sized drill bit that is specially made for drilling into these types of materials.
You should use a masonry bit for this. The drill itself isn't so important; just about any general-purpose drill will work.
Use a carbide tipped drillbit in a regular electric drill. - Using a hammer drill will crack brick.
A 24v drill is generally used for light domestic or D.I.Y. jobs around the home. When working with concrete, reinforced concrete, or stone, a higher voltage drill may be required.
You can drill holes in aluminum with a drill as long as you have the proper drill bit. Use a regular drill bit and keep speed moderate.
A regular HSS drill bit will easily cope with masonite.
Depends on the size hole you need to make and what you need to do with it. If you need to make a large hole in concrete, or totally destroy the concrete, use a jack hammer or even a sledge hammer. Or you could use a drill to drill a small hole in concrete if you need to install a fastener of some type. You can rent special drills with diamond heads at most hardware stores if you just need it for a short period of time.
Roman concrete was no different from regular concrete, so I'm fairly sure I still do.
Use a steel ring and Tapcon concrete screws or you can use shields and regular screws.