before plcement in any mold with out compction is the fresh concrete. or just after plceing the concrete before initial setting is the fresh concrete.
Properties of fresh concrete:WorkabilitysegregationBleedingHarshnessProperties of hardened concrete:DurabilityPermeabilityCreepShrinkage
Regular sugar will cause the concrete to never set.
exceed mixing and compacting
Pouring a concrete slab is the pouring of a fresh unset concrete mix into a prepared area, where it is finished by floating etc to give the required surface, and it sets to form a slab.
Assuming you mean a concrete foundation- after concrete is mixed, it undergoes a chemical change. It does not "dry"- it "cures"- and becomes harder. The process takes place over a period of days or weeks- gradually getting harder and stronger.Until it has cured- or hardened- enough, you cannot place heavy weights on it, or the fresh concrete will break. It usually reaches adequate cure within a few days, andnear max cure at 28 days.
Properties of fresh concrete:WorkabilitysegregationBleedingHarshnessProperties of hardened concrete:DurabilityPermeabilityCreepShrinkage
Properties of fresh concrete:WorkabilitysegregationBleedingHarshnessProperties of hardened concrete:DurabilityPermeabilityCreepShrinkage
Regular sugar will cause the concrete to never set.
a process of compacting and molding fresh concrete within the forms
Density of M30 and any fresh concrete is 2400kg/cu.m and reinforced concrete density you can take 2500 kg/cu.m
Properties of fresh concrete:WorkabilitysegregationBleedingHarshnessProperties of hardened concrete:DurabilityPermeabilityCreepShrinkageUses of reinforced cement concrete:It is used in flexural membersUsed in compression membersused in slabs, beams, columns, footings,etc.,
The Kool Deck topping can be applied on BOTH fresh concrete and existing concrete with the PTA bonding agent. It is most commonly applied on fresh pours because of labor and timing simplicity, which lowers cost. Kool Deck toppings applied on existing concrete bond equally well as a Kool Deck surface applied to a fresh pour.
exceed mixing and compacting
Duff Andrew Abrams has written: 'Quantities of materials for concrete' -- subject(s): Concrete, Tables 'Effect of curing condition on the wear and strength of concrete' -- subject(s): Concrete 'Tests of bond between concrete and steel' -- subject(s): Reinforced concrete 'Effect of vibration jigging and pressure on fresh concrete' -- subject(s): Concrete 'Test of a 40-foot reinforced concrete highway bridge' -- subject(s): Bridges
Closest I find is the UK online. try asking a local construction company who they use.
The Civil Engineering Data Standards manual states the density of many grades of concrete. Standard density for fresh M-25 concrete is: 2414 Kg/ M3.
Pouring a concrete slab is the pouring of a fresh unset concrete mix into a prepared area, where it is finished by floating etc to give the required surface, and it sets to form a slab.