mechanics deals with the rigid bodies, where as som deals with the flexible bodies.
Engineering mechanics deals with mechanical behaviour of rigid solid subjected to external load
The strength of material deals with non-rigid solids under applied loads
Engineering mechanics based on theoretical aspect strength of material based on practical aspects as well as realistic concept that means engineering mechanics deals with non deformable bodies and strength of material deals with flexiable body
The yield strength or yield point of a material is defined in engineering and materials science as the stress at which a material begins to deform plastically. Prior to the yield point the material will deform elastically and will return to its original shape when the applied stress is removed. Once the yield point is passed, some fraction of the deformation will be permanent and non-reversible. In the three-dimensional space of the principal stresses (σ1,σ2,σ3), an infinite number of yield points form together a yield surface. Knowledge of the yield point is vital when designing a component since it generally represents an upper limit to the load that can be applied. It is also important for the control of many materials production techniques such as forging, rolling, or pressing. In structural engineering, this is a soft failure mode which does not normally cause catastrophic failure or ultimate failure unless it accelerates buckling. See the related link for further information.
Non-hydraulic cements include such materials as (non-hydraulic) lime and gypsum plasters, which must be kept dry in order to gain strength, and oxychloride cements, which have liquid components. Lime mortars, for example, "set" only by drying out, and gain strength only very slowly by absorption of carbon dioxide from the atmosphere to re-form calcium carbonate through carbonization.
Strength of joint
A measure of the reduction in strength of a metal caused by the presence of a notch.
To minimize the effects of sudden changes in signal strength.
Irving Porter Church has written: 'Mechanics of engineering' -- subject(s): Strength of materials, Engineering, Applied Mechanics 'Hydraulics' -- subject(s): Hydraulics, Pneumatics 'Diagrams of mean velocity of uniform motion of water in open channels' -- subject(s): Hydraulics 'Mechanics of engineering' -- subject(s): Strength of materials, Engineering, Applied Mechanics
Robert D. Snyder has written: 'Engineering mechanics: statics and strength of materials' -- subject(s): Statics, Strength of materials
Stephen Timoshenko has written: 'Mechanics of materials [by] Stephen P. Timoshenko [and] James M. Gere' -- subject(s): Strength of materials 'Engineering mechanics: statics' -- subject(s): Applied Mechanics, Forces and couples, Mechanics, Applied, Statics 'Theory of plates and shells' -- subject(s): Elastic plates and shells, Strains and stresses 'Collected papers' -- subject(s): Applied Mechanics, Mechanics, Applied 'Theory of elasticity, by S. Timoshenko and J.N. Goodier' -- subject(s): Strength of materials, Elasticity, Strains and stresses 'Theory of elasticity' -- subject(s): Strength of materials, Elasticity, Strains and stresses, Elasticiteit, Mechanische eigenschappen, Vaste stoffen 'The orie des vibrations a l'usage des inge nieurs' 'Theory of elastic stability' 'Engineering mechanics' -- subject(s): Applied Mechanics, Mechanics, Applied 'As I remember' 'History of the development of strength of materials in Russia' -- subject(s): Strength of materials, History 'Theory of elastic stability' 'History of strength of materials' -- subject(s): Strength of materials, Structural analysis (Engineering), Elasticity, History
R. C. Hibbeler has written: 'Engineering Mechanics Dynamics' 'Engineering mechanics' -- subject(s): Textbooks, Applied Mechanics 'Study guide and problems supplement' -- subject(s): Statics 'SI engineering mechanics, dynamics' -- subject(s): Dynamics 'Engineering mechanics (statics & dynamics) value pack' 'Engineering mechanics' -- subject(s): Applied Mechanics, Dynamics, Mechanics, Mechanics, Applied, Problems, exercises, Problems, exercises, etc, Statics 'Analisis Estructural - 3b' 'Mechanics of materials' -- subject(s): Strength of materials, Structural analysis (Engineering), Materials, Problems, exercises, Applied Mechanics 'Study guide and problem supplement'
Philip Gustave Laurson has written: 'Mechanics of materials' -- subject(s): Building materials, Materials, Strength of materials 'Properties and mechanics of materials' -- subject(s): Building materials, Strength of materials
Engineering Mechanics deals with the behavior of matter. You'll learn how matter reacts to stresses, strains, and thermal effects. You'll learn about resultants, equilibrium, and centers of gravity. You'll learn about the strength of materials, the mechanics of motion, statics, and dynamics. You'll study engineered structures to analyze their stability, design, and safety.
Hugh Ford has written: 'Advanced mechanics of materials' -- subject(s): Applied Mechanics, Mechanics, Applied, Strains and stresses, Strength of materials
G. N. Smith has written: 'An introduction to matrix and finite element methods in civil engineering' -- subject(s): Matrices, Strength of materials, Structural analysis (Engineering) 'Elements of soil mechanics' -- subject(s): Soil mechanics 'Elements of foundation design' -- subject(s): Foundations 'Probability and statistics in civil engineering' -- subject(s): Probabilities, Soil mechanics, Statistical methods, Structural engineering
John N. Cernica has written: 'Fundamentals of reinforced concrete' -- subject(s): Reinforced concrete construction 'Geotechnical engineering' -- subject(s): Soil mechanics, Foundations, Case studies, Design and construction 'Strength of materials' -- subject(s): Strength of materials
A. C. Ugural has written: 'Advanced mechanics of materials and elasticity' -- subject(s): Strength of materials, Materials, Elasticity, Mechanical properties 'Advanced strength and applied elasticity' -- subject(s): Strength of materials, Elasticity, Materials
Martin A. Eisenberg has written: 'Introduction to the mechanics of solids' -- subject(s): Applied Mechanics, Strength of materials
soil mechanics is the science dealing with soil to knowing ,type of soil , bearing capacity of the slackening weakness and strength of the soil and by soil mechanics can we give a recommendation to the designer Foundation engineering is design of foundation of any projects ,building ,factories ,stores ....)the design of foundation type depended on the bearing capacity of the soil of the concerned site of the project.