0
Strength of joint
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
A small computer designed for an individual user is called?
A personal computer that is small enough to fit on your lap is called a laptop computer or simply a laptop.
What is a flange rating?
*Any flange having different MOC bears the rating with respect to international standards like ANSI B16.5.*It is a designed pressure that a flange can withstand.*For example a flange is having the following specification:25NBX150#,FORGED CARBON STEEL as per ANSI B16.5is having 150 psi flange rating.It can withstand 150 psig pressure safely.(Noting that in most cases the pressure-temperature charts of a given spec will allow for normal operating pressure to far exceed the class rating at ambient temperature. For example a 150# flange in A105 Carbon Steel will rate for 285PSI at -20 to 100 Degree F. For more information see www.texasflange.com The original intent was to class the parts to safely hold the given pressure at relatively high temperature. Since often times the operating temperatures are much lower the flanges can usually be used well above their given rate. When in doubt take your design criteria to a company that deals in it and ask for the specifics.)*Pipe flanges that are made to standards called out by ASME/ANSI B16.5 or ASME/ANSI B16.47 are typically made from forged materials and have machined surfaces. They are typically in "Pressure Classes" such as 150#, 300#, 600#, 900# 1500#; however, ASME B16.47 still recognizes the 75# or "Class 75" flange for certain low pressure and low temperature applications. These "Pressure Classes" have both pressure and temperature ratings for specific materials. The flange faces are made to standardized dimensions and are typically "flat face" "raised face" "tongue and grove" or "ring joint" styles, although other obscure styles may be permitted. Flange designs are available as "welding neck" "slip-on" "lap joint" "socket weld" "threaded" and also "blind flange". The gasket type and bolt type are generally specified by the standard(s); however, sometimes the standards refer to the ASME Boiler and Pressure Vessel Code (B&PVC) for details ( see ASME Code Section VIII Division 1 - Appendix 2 ). These flanges are recognized by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping. Materials for flanges are usually under ASME designation: SA-105 , SA-266 or SA-182.*Please visit following link and download the software, you will get both pressure v/s temperature rating of flange:
What joint is in a wooden cross?
lap joint.
What is the difference between lap joint and butt joint?
Butt joint contain cover plates on the exposed surfaces of the plates to be joined whereas Lap joint does not.
What is electrical joint and splices?
western union short/ long ordinary tee joint ordinary cross joint over lap tee joint over lap cross joint trough fixture joint rat tail joint double cross joint double tee joint bouble over lap cross joint multitap rat tail joint --well, I'm not sure about that!
What gule should you use for a lap joint?
I assume that this is a lap joint in wood. If the lap joint is going to be exposed to weather outside, I'd look at a "marine" adhesive used in wooden boat making. Otherwise, any good wood glue applied to a clean lap joint, clamped, and allowed to properly cure over time should do nicely. The glue should be applied at room temperature in an even thin coat to both surfaces and then evenly clamped with several clamps along the joint for 2 days or so.
How is a lap joint made?
shiplap, shiplap boards, shiplap siding - Wood sheathing whose edges are rabbeted to make an overlapping joint. It is a wood joint used chiefly in exterior siding finishes, it involves rebating the bottom of the horizontal piece of wood as it progressively is stacked on each other. Architecture Student
What is a ship lap joint?
shiplap, shiplap boards, shiplap siding - Wood sheathing whose edges are rabbeted to make an overlapping joint. It is a wood joint used chiefly in exterior siding finishes, it involves rebating the bottom of the horizontal piece of wood as it progressively is stacked on each other. Architecture Student
When is a half lap joint used?
a half lap joint is used when needed to connect two woods togeter
What are the different types of welding joints?
One of them is the 'butt joint', where two pieces of metal are simply butted together. Another is the 'lap joint'. Other types include, but are not limited to: the flange joint, the corner joint, and the cruciform joint. See the related Wikipedia link listed below for more information, including diagrams.
What are some carpentry joints?
Some types include: Butt Joint Lap Joint Miter Joint Box joint Dado joint Dovetail joint Tongue and groove joint Mortise and tenon joint
What makes a lap joint stronger?
that is such a stupid answer
What is a half flap jointin woodworking?
The term is "half lap" and it is a variation of the standard "lap joint".
3 types of piston ring ends?
a) lap joint b) angled joint c) butt joint
