The easiest way to do this. Very lightly apply the emergency brake. Moving the pedal will turn the lights off. You can drive like this as long as the emergency brake is not actually engaged. Try it..... A permanent fix would be to install a toggle switch connected to the e-brake pedal switch.
You should read from 13.5 to 14 volts at the battery when the car is running.
on a 98 e350 the fuse is in the engine compartment in the box just behind drivers side headlight 30 amp green fuse check your book for right fuse
Wear the seat Belt !
no tail lights no dash lights no radio
I take it you mean day-time running lights? Place the parking brake on the first notch will turn them off and not apply the brake.
Check for a bad ground
How to adjust the head lights of 350e
The back up lights on an E350 Ford Econoline Van won't work if the fuse has blown, the bulbs are bad, or the wiring has become disconnected. The reverse sensor also controls when and if the lights turn on.
yes
This is indicative of an electrical fault or problem causing the failure of multiple lights. The first steps should involve checking the switches and relays. The next steps are checking the switch assembly. Had
BLK/PNK
under dashboard