i dont think but i am nut shure i think on the maximas they startet raction control in 1999 and it was otional but not shure
Yes.
The selective traction control didn't appear until the 1998 model year but traction control started to be installed in 1995.
how can I clean the Idle Air Control Valve on a 1998 Nissan Frontier
Traction Control System
On a 1998 Lincoln Town Car : If " check trac " is displayed with the engine running a problem with the traction control system has been detected and the traction control system needs to be checked and the problem corrected
From what I know your abs is what has the traction control built in, your abs controls your master cylinder, so if you are having a traction control problem you are going to want to replace your abs box not your master.
P1148
Are you wanting to know how to turn the traction control on and off? Press the VEHICLE SETTINGS button on the multi display unit, the first one that comes up is the TRACTION CONTROL. Then press the RESET button and the TRACTION CONTROL will be disabled. Repeat this process to turn it back on or cycle the ignition key and it will automatically be turned back on. When you disable the T/C there will be a green warning light that remains on saying T/C OFF.
The answer you got was incorrect. 1998 Maximas have a 3.0L V6 with a timing *chain*. You do not replace the chain on any kind of regular maintenance interval. It will probably last about as long as the camshafts, in other words, the life of the engine, which is upwards of 200K miles in these cars if they are treated well.
The 1998 Nissan Ultima control arm is held in place by a retaining nut on both ends of the arm. The ball joint can be removed by using a hammer or mallet.
it means that your tires has little or no traction. The computer is corecting the probelm. (traction control fixes when one wheel is spinning faster than the other one.)
Pressing that button temporarily turns off traction control.