0
What else can I help you with?
Install a new ignition switch on a 1984 Kawasaki 900 GPZ I don't see any mounting bolts?
There are two star-head screws on the rear of the ignition switch.(Actually reversed star-head screws) You need to buy a special tool to get them off.
Do the bolts and screws to install the microwave come included?
Yes, everything you need to properly mount it is included except for screwdriver and drill if you need one.
Do you need a special tool to remove one of the bolts in the alternator of a 96 sebring convertible?
No
How do you remove the factory grill on a Jaguar 2000 S Type Do you need a special tool for the screws on the side of the grill?
No special tool needed. Just go to your local AutoZone and find the correct fitting wrench and remove the 2 bolts holding the grill down. The rest is just a quick pull and your out.
You owned a 95 cutlass ciera and you need to replace the EGR valve your question is what type of screw driver would you need to take the screws out of the old egr valve in order to replace it?
They are not screws they are bolts either 1omm or 13mm
where can I purchase a tan canvas trim material for my awning?
You need to check your local fabric store for a large amount of tan canvas material for your awning.
How do you make a Tech Deck from scratch?
you cant you need to go to kmart and buy them or you can build them with the washers,screws,wheels,bolts,and a board.
What type of screws are needed to mount a TV securely on the wall?
To securely mount a TV on the wall, you will need lag screws or toggle bolts. These types of screws provide strong support for the weight of the TV and ensure it stays securely in place.
How to Install a Retractable Awning?
Retractable awnings are a great way to stay cool in the summer heat. There are many stores that sell them ready to be installed, and doing it yourself is an easy way to save some money. A Retractable awning is a cloth awning that can be rolled out or retracted, either by hand or with a motor. These awnings tend to be pretty large, so you should get a motorized awning to save yourself the effort of pulling it up by hand. Be sure to make measurements for the size of your awning before you buy one, and talk to the workers at the store if you have any questions. Once you buy your awning, make sure to have a few things on hand: A tape measure A stud finder A motorized (electric) drill with appropriate drill bits Something to set and draw level lines, such as a piece of chalk and a level. Any appropriate screwdrivers, wrenches, or ratchets. Any appropriate Lag bolts. Check the manufacturer’s box and instructions for anything else you might need. Now follow some easy steps: 1.) Use your level line-making tools to draw out where you want to install your awning. You don’t want it too low. Look in the instruction manual to see how low the awning will drop, and then install your awning so that it won’t bump into anyone’s head if it’s fully retraced. Figuring out the placement of your awning is important and the easiest step, so take your time. 2.) Next, install the mounting bracket for your awning. First, find the studs that you will install the mounting bracket on to with your stud finder. Make sure you find the center of the studs. Use the mounting bracket to mark with chalk where you will be installing the lag bolts into the studs. Once you are sure where you are drilling your lag bolts (if it’s not the center, this will jeopardize awning safety), go ahead and drill them, securing your bracket to the lag bolts. 3.) Next, install the awning hood onto the mounting bracket. This part differs depending on which model you purchased.
What do you need to assemble a bed frame?
To assemble a bed frame, you typically need the bed frame pieces, screws, bolts, a screwdriver or drill, and possibly an instruction manual.
What tools do you need to install a retractable awning?
Measuring Tape, Wrench, Power/Hammer drill with wood drill/stone bits, Ladders(depending upon the height you need to install) are the tools you need to install a retractable awning.
How do you remove pink mildew stain from travel trailer awning?
Its not mildew. Its a bacteria, Serratia marcescens. You will need to use a bleach based solution. This will probably destroy the awning in time, however; especially when coupled with the sunlight the awning will experience. Rinse it thoroughly!@!
