0
What else can I help you with?
What is the voltage of a series circuit with four voltage drops of 30 volts?
there is 120V across the circuit.
When do you use a series circuit?
In resistive circuits,when you need the same current in the whole circuit,you use series circuit because in series circuit current remains the same.If you have two batteries of 12 volts each,and you need 24 volts you can arrange them in series to get 24 volts you have to connect them combine with opposite terminals.positive of one battery will connected with negative of other battery,and negative of second will connected with the first's battery positive terminal,they are in series now.
If 3 1.5 V cells were connected in series what would the total voltage of the circuit be What about in Parallel?
4.5 volts in series; 1.5 volts in parallel.
What is the voltage drop of a series circuit with four voltage drops of 30 volts?
there is 120V across the circuit.
If three lamps are connected in series to a 6 volt battery how many volts are impressed across each lamp?
In a parallel circuit, Voltage is constant through out the circuit. Thus, the voltage across each lamp is 6-volts.
How do you measur ampere?
You use an "amp gauge" to measure amps in an actual circuit. It is hooked in series with the load. It can be placed anywhere in the circuit as long as it is hooked in series. Mathematically, you have to know the resistance, or wattage and voltage of a circuit. Volts=amps*resistance or amps=volts/resistance, or resistance=volts/amps. Ohms law!
If two 2-volt batteries are connected in a series how many volts are available to the circuit?
The formula you are looking for is Vt = V1 + V2.
How do you make a light circuit flash?
Wire in a turn signal flasher in series with the circuit you wish to flash. The flasher has two terminals. Just insert the flasher anywhere in the circuit. It will make/break the circuit to make the lights flash. This is considering that the circuit is 12 volts and not 120 volts.
How do you use volts?
Volts are used to measure the electrical potential difference or voltage in a circuit. To use volts, you would typically measure the voltage across a component in a circuit using a multimeter or voltmeter. This helps in determining if the component is receiving the correct amount of voltage for proper operation.
What is the amount of electrical pressure in a circuit?
The amount of electrical pressure in a circuit is measured in volts (V). It represents the potential difference between two points in the circuit and is responsible for pushing the electric current through the circuit.
What happens to the energy as it goes around a series circuit?
What do you mean by energy? amps? Volts?, Either way if you have a series circuit with 3 loads in the circuit all voltage will be dropped proportionally to the loads resistance, if that makes any sense.
When using a 9 volt battery on a closed circuit with 2 light bulbs how many volts are used to light each bulb?
Each light bulb will receive the full 9 volts from the battery in a series circuit, so each bulb will be operating on 9 volts.
