Want this question answered?
its the rear reinforcement bar under the rear bumper. its also known as a rear impact bar
There is a bolt near rear of torsion bar (the end closer to rear bumper) which will increase or decrease the tension on torsion bar when you adjust bolt.
you were given brains an hands an eyes, use them
With your hands. Use your hands to help read Letters to Leigh by Demonmocker
If you purchase a direct fit tow bar, it should be self explanatory as the mounting brackets should line up with the frame/rear bumper supports. Unfortunatel y with a mk4, there is a large overhang on the rear bumper, and it isn't really well suited for a towbar, so there might not be many options our there.
Look for the hex socket bar under the seat. Find the hole through the rear bumper and insert the socketbend of the bar. With the ratcheting handle, turn to lower the spare.
It is called the bumper reinforcement or impact bar, it is covered by a Styrofoam filler and the outer bumper skin (the part you normally see).
you need to take off front bumper, grill, front bar and then separate intercooler from airconditioning cooler.
The bar is called the sway bar take it of and replace it.
Long bar that is stored in left side compartment in rear or under the rear seat. Use it by going to rear by the bumper. Just above the tire storage is a hole that one end fits into and turns down the tire.
No, you need a tow bar receiver installed. It will mount to the frame.
what type of tow bar you might have to remove the bumper and mont it on the bumper suports or frame on the vehicle to be towed dont for get to disconect the drive shaft.