no
you will open the hood. hook up the can and open the vavle
You can hook up an MSD Digital 6AL/6A on an 84 Chevy truck by first replacing the original cap, and rotor if they are worn out.
Quick release fitting located on the low pressure side (Larger hose from compressor)
leads on battery, inductive on no 1 wire
Unhook the NEG. battery cable for about 5 mins, then hook it back up and go drive the truck normal about 10 miles. That's it.
It sounds like your truck is not able to handle towing the trailer. You can hook up a switch to make the cooling fan come on whenever you need it to cool down the engine.
where your tape player is in the middler of your dash replace that with your CD player and un hook the wires from your stock radio. I did the same think in my truck and it works fine.
Just unhook the battery cable for about 10 Mins. Then hook it back up and drive it.
Which do i hook to to charge the freon in a 2004 ford expedition
This question should really specify what kind of Chevrolet truck it is. In 1992 Chevy produced a C Series Pickup, K Series Pickup and S Series Pickup. That said, it appears that all three of these vehicles have the most common hook-style wiper arms which means you simply press a little tab where the blade is inserted into the hook and then pull the wiper blade out of the hook. The new one snaps right back in.
Hook up a/c refrigerant to the suction side. be careful to not add to much. you can buy a guage and r134a freon at wal-mart or pep boys for cheap.. but you can't buy r-12 if the system is still r-12 you should consider retrofitting to 134a
On that year, you can just unhook the battery for 5 min. and then hook it back up and go and drive it for a few miles. That's it.