Grout is porus and degrades after time, the proper item to use would be caulking ( non porus and waterproof) also degrades, but can be replaced easily. Grout is preferred because it lasts longer, is pourous to a degree and will let water evaporate so that mold will not grow. Caulk is used for more temporary bonds such as between the sink and a painted wall. Grout, if installed properly can last you a lifetime.
Make sure you have thoroughly removed the old caulk around your bathtub before replacing it with new caulk. You can buy a scraper tool at any hardware store that will help you easily scrape away and remove the old caulk.
When you are purchasing new caulk for your bathtub, you will want to purchase an anti-microbial caulk because this will prevent mold from forming or coming back in the future.
Before applying the caulk, you will need to cut the tip off the applicator. Don't cut the tip too big because you don't want too much caulk. Try to cut the smallest hole possible on the applicator. You can always widen it later if necessary.
Make sure the joint where you are applying the caulk is clean and free of debris. Then, start at one corner, and squeeze your bead of caulk out, evenly running it from one corner to the other. After you have evenly squeezed the caulk into the joint, dampen your finger and smooth down any beads or bumps. If you accidentally put too much caulk into the joint, just take a damp rag and run it across the joint, wiping up any excess caulk.
You should now have a smoothly caulked joint on your bathtub.
Silicone caulking compond is the most water-resistant and therefore the best kind to use for bathtubs and showers. You would probably want to use white, since it blends best with the white grout in bathroom tiles, although transparent will work just as well. Note that in order for the silicone to bond properly, it must be applied to a very dry surface.
only caulk the seal if it is pulling away from the tub or every 10 yr if it is not pulling away.
First, remove the old caulking. Clean any mold and dirt and allow the area to thoroughly dry. Add your new silicon caulking and let dry a full 24 hours or more.
A 100% silicon caulk is best for tubs. The area to be caulked should be totally de-greased with lacquer thinner or alcohol (NOT rubbing alcohol) before applying the caulk.
A silicone caulk is the best. It's the easiest caulk to apply and also remove if needed.
I have no idea but it disitagrated my bathtub caulking.
To caulk is to fill the cracks of a container which is intended to contain liquid (like a barrel or bucket or bathtub) with a substance which will seal the cracks and make the container waterproof. You can caulk anything which is intended to be waterproof, including things which are intended to keep water out (a roof, the hull of a ship).
Silicone (RTV) caulk is difficult to remove. Popular Mechanics has a useful article at http://www.popularmechanics.com/home_journal/how_to/4213124.html
Caulking can be an answer but when you do it you have to be very careful. Try to not destroy something else while you are doing caulking. If you are unsure of doing it look at yellow pages and call someone who is professional.
First you need to place some rubbing alcohol on a cloth and wipe the area you will be applying the caulk to after you have cleaned the area very thoroughly. GE silicone 2, bathroom is one of the best silicone I have ever used.
Caulk.
Clarence L. Smith improved the formula for RTVS. The product of his work is what we know now as bathtub caulk or just caulk. He improved this formula while working for GE. Silly Putty was an unexpected result of his work.
You can heat it up with a hair dryer, using a straight blade and a painter tool, heat it up.. peel what you can off. Then use the blade to get the smaller, harder caulk. This has worked great everytime!
we we put on new caulk in the bathroom but it is still sticky... it has been 48 hours. anyway to speed up the process... we used ge silicone caulk
Use an exterior window caulk. If you plan to paint over it make sure it is "paintable" caulk. Run the bead of caulk using a caulking gun. You can smooth out the bead with your finger and clean up any residual caulk with a wet rag (this clean uo only works if the caulk is water based...check the tube to make sure it is....it's easier if it is) If you use silicone caulk you can't paint it and you cannot clean up any errors with a wet rag so unless you are real exact in applying the bead I would avoid this type of caulk.
Battle of Caulk's Field happened on 1814-08-31.
It depends. Are you looking for a long lasting caulk? An aquarium caulk? A small tube for a minor job or a large cartridge? Decide what kind of caulk you want, what quantity, and then go to a web site for a home improvement store and research prices.