answersLogoWhite

0


Best Answer

not unless the transmission already comes with a clutch for high performance hugh horsepower builds it would be better to upgrade the clutch anyway

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Do you have to get a new clutch when installing new transmission in mustang?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do you have to drop a gearbox on a 1.8i cavalier expression to do a clutch?

The transmission must be removed to install a new clutch.The transmission must be removed to install a new clutch.


Check the clutch fluid on a new beetle?

The VW Beetle does not have clutch fluid. There is not any fluid associated with the clutch. The transmission has transmission fluid.


How do you replace a clutch on a 2001 Ford Focus SE?

First remove front axels, then remove the transmission, undo clutch bell housing. Add on new clutch pressure plate.....new clutch bell housing......put the transmission back in and axels


How do you replace a clutch in a 1995 s10?

Remove the transmission. Remove the clutch plate and springs. Remove the clutch. Reverse the process to install the new clutch.


Why does a car start but not shift gears?

You either need a new transmission or a new clutch.


Your overdrive in your Mitsubishi 3000gt quit working?

You need a new end clutch kit. Go to http://www.importperformancetransmissions.com, select your transmission type (auto or manual) and purchase the "IPT End Clutch Kit" under the "Overhaul Parts" section. To install, remove the front passenger wheel and the wheel well cover. Locate end clutch, remove, and reverse removal process for installing the new one.


How do you adjust the clutch on a 1996 mustang gt you put a new clutch in and now you need to adjust it?

Its self ajusting! all you do is pull the peddle up and press it down


What does it mean if engine revs when accelerating?

Manuel transmission? You need a new clutch.


How do you replace the clutch on a 1997 Geo Metro?

You take out the transmissioon, take out the clutch, put a new one in, and put the transmission back in.


How do you install a clutch in a Hyundai getz?

Installing a new clutch is a complicated procedure best left to a trained mechanic. One needs to remove the axle and other components of the system from under the car, remove the old clutch, and attach the new one to the axle.


How do you remove and install throw out bearing on a 2003 Honda Accord coupe 2.4 liter 5 speed?

The short answer: Pull the transmission and put a clutch kit in it. A Honda Accord clutch kit comes with the clutch disc, pressure plate, and a new throwout bearing.Once you get the transmission out, the throwout bearing is slid onto the transmission input shaft and is connected to the clutch arm. You unhook it from the clutch arm, slip it off the shaft and put the new one in its place.


How do you install a new clutch in a 1990 tracker 4 wheel drive?

To install a new clutch in a Geo Tracker, first the negative battery cable must be disconnected and the vehicle lifted on jack stands. After removing the driveshaft and all wiring connections from the transmission, the transmission should be removed. From there, a new clutch disk may be installed.