0
If you don't change anything on the A frame or steering arms, then it shouldn't be necessary. However if you have a few bucks spare it's not a bad idea.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Why do struts go out?
Struts wear out on a car because they tend to rust. A person that does a lot of winter driving will probably have to replace struts in a car once while it is owned, if kept for a long time.
How do you replace the front struts on Hyundai Sonata 2000 model?
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
How hard is it to replace struts?
It isn't hard at all aslong as you have patience and alittle know how. Be warned I highly suggest you take the struts once removed from the car to a service center to have them remove the strut from the springs!
How do you replace struts on 96 olds 98 regency?
If you don't have the right tools don't attempt to change your struts. Getting the struts of is, easy but you have to have a spring compressor once you get them off also you need a workbench with a vice to remove the spring. Very Dangerous without proper tools.
Why would the front wheel hop on your 96 blazer when going over bumps?
It sounds like it could be a bad strut. Push down quickly and firmly on the front of the vehicle, if the car bounces more than once or twice you may need to replace your struts.
How does one replace a car steering wheel cover?
You can replace a steering wheel cover by first removing the old steering wheel. Once complete, wash and dry clean the steering wheel and then apply your new steering wheel cover.
How do you replace front wheel bearing 1992 k1500 Chevrolet?
i may be wrong, but if i recall correctly from high school automotives the wheel bearing has to stay with the wheel it was built for so you have to replace the whole wheel once again though i am not 100% on this
How do you replace the steering wheel radio and cruise control buttons on a 1999 Lincoln town-car your buttons have melted?
replace the whole steering wheel cause once the buttons have melted??...they wont work anyway.
How do youm replace the fly wheel on a 1988 Chevy Suburban with 5.7 liter engine?
The transmission has to be removed. Once the trnsmission is removed the fly-wheel is right there to be removed.
How to Replace blown light bulbs in 1991 hiace van?
The headlights on a 1991 Hiace van have to be reached through the wheel well of the vehicle. Once the wheel well is removed pull the old bulb from the housing and replace the bulb.
How do you change steering wheel on 1980 corvette..Help?
To change a steering wheel a person needs a steering wheel puller to get the old one off. Once it is off, replace it with the new one, which will go on easily when aligned correctly.
How do you to install 1997 Taurus hood struts?
1) Buy parts 2) ask a friend to help you. Loosen the retaining nuts/screws attached to the hood just rear of the fron wheel wells. you will need a friend to hold the hood up once they are removed. 3) place the new hood struts in place, attach them, thank your friend and voila!
