i may be wrong, but if i recall correctly from high school automotives the wheel bearing has to stay with the wheel it was built for so you have to replace the whole wheel once again though i am not 100% on this
To replace the front differential bearing on a 2005 K1500, first, lift and securely support the vehicle. Remove the front driveshaft, differential cover, and drain the fluid. Next, remove the differential carrier by unbolting it from the housing, then replace the old bearings with new ones using a bearing puller and press for proper installation. Finally, reassemble the differential, refill it with fluid, and reinstall the driveshaft before lowering the vehicle.
My 93gmc z71 was 13/8 sae
Call or contact Radiator.com on the web. Great products and service.
If you're asking, you should take it to a mechanic. Honest, you don't want to tear into that. Special tools are required, you have u-joints, brake lines, torqued bolts - it's a mess.
A Chevrolet K1500 is a pickup truck with an extended cab, allowing for seating of up to four adults or children inside the pickup cab. The truck is no longer being produced by the Chevrolet company.
The maximum towing capacity of a 1999 Chevrolet Silverado K1500 is 4,500 pounds. The maximum payload for this vehicle is 2,177 pounds.
It is behind the harmonic balancer on the left front side of the timing cover.It will have 1 bolt that holds it in.
The 2004 Chevrolet Silverado takes 22" replacement windshield wiper blades on both sides front.
200 hp
The towing capacity of a 1999 Chevrolet K1500 with a fifth wheel is 8,500 pounds. This allows the vehicle to carry large trailers and boats safely.
Inside the fuel tank
4L60E in 5.0 or 305 cu in 4x4