you shouldn't depending on if theres adequate clearance for you're wrachet spark plug socket and hand i always do one at a time to avoid any mixup of plug wires
remove all the screws
you pull it out
Remove the retaining ring from the top of your 1979 Chevrolet C 10 pickup truck ignition switch. Slide the ignition switch out and remove the wiring harness.
you have to drill out the rivets
You shouldn't own a chevy if you can't figure out how to remove the bumper
Remove the water return line from your 1998 Chevrolet pickup truck water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Remove Distributor,remove drive gear,remove shaft,remove pickup coil.
I've heard it's faster to remove the pickup bed than remove the fuel tank. Once you have access to the top of the fuel tank, the pump can be removed from the tank.
Remove the battery cable, this is a sure way to get it to shut off.
Remove the retaining ring from the top of your 1977 Chevrolet pickup truck ignition key tumbler. Slide the ignition key tumbler out. Remove the wiring harness from the end of the key tumbler.
Remove nut holding the trans mount to the crossmember jack trans up off of the crossmember then hand wrench bolts out of trans and reverse process.
Sometimes you have to remove the pump to get to the fitting on the pump.