That is exactly what I thought when first changing headlights on my 2001- what a waste of energy...
Check the Owners Manual for an illustrated instruction guide to the easy way of changing headlights.
There's also good information in the "Related Question" below...
I need to know the best way to remove and install the new window motor for a 96 Ford Windstar drivers side. Ray
Machete.
No, you do not have to remove the battery. Just remove the 2 bolts (1/2 socket) on the top and pull out the whole assembly. Then undo the big plastic nut and remove bulb and redo steps to install.
Remove the seat. Remove the battery. Replace the battery. Replace the seat.
Is it the location of the battery,If it is, its under the drivers seat. The drivers seat tilts to reveal the battery.
Jack the front up, take off the drivers side wheel/tire, remove the plastic wheel house liner 6 screws (you will see), remove negative terminal, remove positive terminal, remove bracket that holds battery, reverse order to install.
It located on the drivers side engine compartment over top of the transmission you will need to remove the battery tray to install'
Release a latch and then remove the battery, then install charged battery into laptop.
The passenger window on a windstar is best installed by a professional. However, if you have some auto repair experience, you can easily remove the door panel on the door by removing the screws and then you will be able to install the new window.
Remove the cables from the top of your battery. Remove the battery stabilizing retaining bolts. Reverse the process to install your new battery.
remove negative and positive cables,take battery holddown bolt off,remove battery! when installing new battery, battery hold down first then install the cables , neg first!dont forget to reset radio.
Remove the cables from the battery posts. Remove the battery retaining bolts. Lift the battery out of the retaining box. Reverse the process to install the new battery.