There will be a wire on the back of your head unit that turns the amp on. It will be marked something like "rem" "remote" or "amp." If not, consult your head unit manual.
Need to know the voltage the amp operates on.
Yes, the amp rating is a measurement of the highest amp load it should carry. So a 15 amp appliance will work on a 20 amp socket but you wouldn't want to use a 20 amp appliance on a 15 amp socket.
"CAN"? Certainly. But you will need to run a new service cable. You'll need to have your licensed electrical contractor work out the details with your local electrical power company, and get the appropriate permits.
#10 cable is no good for 120 amps, you need #2 cable, and it can be used at a distance of 250 ft.
'Rem' stands for remote, you connect a turn on lead to it so the amp knows to power on.
'Rem' stands for remote, you connect a turn on lead to it so the amp knows to power on.
This unit requires a PWM power supply.
This unit will require the PWM power supply system
Have you checked for a lose ground power or rem wire?
Yes, the larger cable can carry more load (current) than the other cable.
power cable goes from battery to cap + terminal. separate power cable from cap + terminal to the amp. make sure the amp and cap are grounded.
Yes, the larger cable can carry more load (current) than the other cable.
No. The amperage describes the total electrical energyeither produced or consumed. Voltage just describes the potential. If the power cable or power supply are only capable of 1 amp and the device consumes 2 amps... sorry, you don't have enough electrical energy available.
There will be a wire on the back of your head unit that turns the amp on. It will be marked something like "rem" "remote" or "amp." If not, consult your head unit manual.
the rem slot on your amp to the rem trigger on your deck (blue wire on most aftermarket desks)
You need to find out what output connections are on your soundboard and what input connections are on your amplifier. If you don't know this, a 1/4 inch cable usually will work at both ends.