answersLogoWhite

0

Do you need a Restricter plate for 350sb intake?

Updated: 8/17/2019
User Avatar

Wiki User

15y ago

Best Answer

Depends on what you are doing, But if its on the street or strip the answer is no.....

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Do you need a Restricter plate for 350sb intake?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you install an edl-1406 on 1978 305?

you will need a different intake manifold from edelbrock or you can get an adapter plate to be able to bolt it on your intake from summit racing.


Where is the restrictor plate on a Chevy Malibu?

same place all restrictor plates are, intake manifold, but the Malibu doesnt have one u can remove, it is build into the intake so u would need a perormance upgrade


Why do 455 Oldsmobiles spin bearings?

Because they oil the cam better than the crank. You need to have restricter plugs put in before you put the main bearing back in....


Where can you get an intake manifold for 91 Cadillac 4.9L to convert to carb?

No body make one for the caddy. You need to make a adapter plate for the manifold so you can bolt on carburetor.


Can a group of male mongoose kill a large python snake?

Yes, even single mongoose can kill large python.


Do you need a front license plate in Pennsylvania?

No you do not need a liscense plate on the fromy of your vehicle in Pennsylvania


What do you need in order to get a license plate sticker?

a license plate


What do you need to get a license plate for your car?

If there is not an existing plate, you need the title, registration, and valid drivers license.


Can you change the lifters in your 318 without removing the intake?

No. They intake and heads need removed.


Need plate to hang inside wall light?

Plate or bracket


Where could engine coolant be leaking from on rear topside of engine on a 1998 350vortec it pours coolant out but can't see where from?

It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely. It is common for the intake manifold gasket to leak antifreeze from the corners of the intake. Need to replace intake gasket. Be sure to look closely at the intake were the gasket seals against it for pitts in the intake. There is a heater hose that goes into the intake on right rear corner in the back, but uo on top of intake. check closely.


If your intake manifold gasket is no good will antifreeze leak out?

Yes, you need to replace your intake gaskets.