It runs off the serpentine belt - one belt for everything.
can you bypass a 2001 oldsmobile aurora ac compressor?
how do you route the alternator and ac belt on a 2001 Mitsubishi eclipse
order the belt for your car and say it does not have ac
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
It is possible to by pass the 2001 Rodeo. By using the serpentine belt for a Rodeo with a non ac system the belt should by pass the compressor.
In Short Yes Did it on my own 01 civic Just need to get different belt for the alternator
Yes.
That depends on what you're trying to do. If you just want to make certain it doesn't turn on, unplug the clutch wire at the front of the compressor.
Yes you can, use a duralast belt # 745K6 from autozone, it will run you about $28
The ac belt will need to have the tensioner to take the belt off. The serpentine belt is in front of the compressor belt and will have to be removed first.
u need to remove the other belt then u need to put the ac belt on behind the pulleys then move the tensioner and put on the ac belt u need to do this from under the truck u will need a 3/8 ratchet u need to remove the other belt then u need to put the ac belt on behind the pulleys then move the tensioner and put on the ac belt u need to do this from under the truck u will need a 3/8 ratchet
You have to remove the ac belt first then the v belt. Once you get them off you need to replace the v belt and ensure it is tight enough. then the ac belt.