answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Do you need a manhole with a non return and a stop valve?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you get into the manhole on park road in professor Layton and the Curious Village?

Professor Layton and the Curious Village, to go down into the manhole you must stop and speak to Rodney.


In boiler feed water line whether a non return valve should precede or succeed the delivery valve of feed water pump?

In boiler feed water line the NRV is normally installed between Pump and stop valve if the line is short and an another NRV is installed at boiler entrance and after stop valve if the line is long or pump is 10 to 15 m away from the boiler.


When you get rid of your satellite television do you have to return your satellite tv equipment supply?

You will need to return the converter boxes in order to stop the billing for them. You do not usually have to return the actual satellite.


How do you stop the survivors on no Mercy in left 4 dead?

In my opinion, the best spot is at the manhole where they first enter the sewer. You wait until all but one survivor has jumped in and then attack the remaining one. As long as you aren't close to the manhole, you're untouchable.


How do I fix a leaky faucet valve caused by a not tight enough screw?

I need to perform a faucet repair. How do I stop a leak that is caused by the screw not being tight enough on the valve?


Why is the Water reserve it not filling up in toliet?

Either the flapper is letting water through or you need to replace your flush valve or there is something stuck between the stop and the flush valve.


When was Stop Space Return created?

Stop Space Return was created in 2008.


Difference between globe valve and gate valve?

The Gate valve is the stop valve & the Globe valve is the fluid Regulating valve.


What are the main functions of the steam stop valve and safety valve?

The function of steam stop valve to supply steam to steam maniform and the function safety valve to prevent the steam high pressure over.


How do you disassemble a stop valve?

With a wrench carefully holding back on the valve body


How to stop leack from a valve stem on a tire?

Fit a new valve stem.


What should be used in the failure of stop valve to isolate the supply from outside tap on cold water supply?

Stop Valve Key