Want this question answered?
To install a new fuel pump you must first remove the muffler, and then the tank protector, and then disconnect all the fuel lines including the ones with the coupler on them that requires a special tool to do so, then you support the fuel tank, unbolt the fuel tank, lower the fuel tank slowly until you can disconnect the rest of the fuel lines and filler line, then remove the tank, remove the fuel pump from inside the tank and put the new assembly in where you took out the old one. When installing the new pump assembly make sure you use a new tank seal or you will be doing all this again very soon.
There is a special tool for releasing the internal clips to remove the fuel lines.There is a special tool for releasing the internal clips to remove the fuel lines.
You need a special tool available at lordco.
Kia Special Service Tool
There is a special inexpensive tool that you can purchase from any auto parts store for removing these lines. Without this tool you can damage the lines.
You will need to go to a parts house and get the special tool that is required.
It requires a special tool that releases the wire clips.
To clean the carburetor on the 1979 Suzuki GS550, it is a good idea to empty the carburetor and remove all fuel lines. Then, replace the float and valve in the carburetor and clean the bowl. Fill the carburetor with fuel and flush several times.Ê
You remove the wheels to replace brake lines.
You will need the special fuel line tools available cheap at your local autoparts store.
The clamps on the fuel lines can be cut off with a pliers.The clamps on the fuel lines can be cut off with a pliers.
The starter is located behind the engine . First take the wires off the solenoid, then take the two bolts that go through the bell housing into the starter off and the starter will come out. Place back on mount, put bolts back on and hook wires and hose back up.