No you do not need to use bulb grease but for 89 cents at your local auto shop its good to use it just like battery terminal grease its good to use projects your connection from corrosion
you don't need a bulb
You cannot replace the headlight bulb. You need to buy a new headlight unit.
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
Changing a 2007 headlight bulb is very easy. You will need to open the hood and find the bulb at the corner of the headlight assembly. Then you will turn the bulb socket counter clockwise to remove. After the bulb is out, you will replace it with a new one and screw it back into the headlight assembly.
To replace the headlight bulb on a 1999 Porsche Boxster you will need to open the trunk and take out the screw of the spare tire compartment. Slide the entire headlight assembly out after loosening it with a hex socket wrench. Then, put a new bulb in place.
yes ,you need to change bulb.
Lift up the hood and look at the back of the headlight you need to replace. Disconnect the electrical connection and then turn the bulb counterclockwise. Then pull it out and replace it with a new bulb. Don't forget to reconnect the electrical connection.
If only the low-beam is out, you will need to replace the low-beam bulb. It is probably not necessary to replace the entire headlight assembly.
no there should be a replacement bulb you can get that just screws in the back of the assembly
Replacing a headlight bulb on a Honda Passport is very easy to do. The hood will need to be opened to change the bulb. The old bulb can be pulled off by using the connector and the new one put in. No tools are required.