Want this question answered?
The 2000 Plymouth head bolts will require a 5/8 socket. You will also need an extension for the ratchet. You should use a large ratchet, as you will need to put 120 pounds pressure on the head bolts.
headbolt torque is : 62 ft/lb cam hold down bolts is : 13 to 20 ft/lb
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
www.alldata.com pay 19.95 for year membership have all info you should need.
You dont need to as long as bolts are tightened in the correct order and torqued to the correct fps.
yes you need to replace head bolts
easy 20 minutes you donnot need to remove the rad or the fan blades just 4 bolts behind the clutch assy
Yes, always install new head bolts.
Which head bolts need asealant applied to them on a 454 big block?
If the head is removed you must always replace the bolts.
I need the torque and secuense for the hea d bolts for a Chevrolet Malibu 2000 3.1
Yes, it is 7mm allen head.