Go see a mechanic. They will help you.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Means you're giving it too much gas and the tires cannot get traction. Slippery surface. Or, if it's on all the time, you need to take it to GM and get them to find out why the sensor is on.
The traction light is on becasue there is no communication between the traction control and the ABS. You will need to check the ABS sensor which is probably damaged or need cleaning. The spanner light normally means go to workshop as there are some problems with the engine electric. The spanner light could be on because the traction light is on. Once the traction issue is sorted, the light should come on automatically. If the spanner light is on on its own or has been on before the traction light then probably the oxygen sensor needs changing.
that means the traction is low. your tires are slipping. check to see if you need tires. or might be a slippery road perhaps even snow.
Unless there is a red light, the front wheels are likely engaged but do not achieve traction unless there is slippage occurring. In other worrds all is likely fine and when you need it -it's there!
You probabl need an alignment-
This is your Traction Control which prevents wheel spin. Turn it on and leave it on. The traction control comes on with each key cycle The button is to turn the traction control OFF If you want wheel spin or need to run vehicle on a dynomometer or hoist
re: bad regulator in the alternator WRONG ANSWER. these lights, when on at the same time, mean one that you will need to change one of your wheel bearings. You will need to have the vehicle scanned to determine which of the four is in need of replacement.
The yellow symbol with exclamation mark in the center is simply a warning light indicating that one or more of your wheels are spinning and have lost traction, the light goes on to tell you either: 1. You have lost traction and the car is working to coorect it (by reducing power to the dif or applying brakes) 2.The car has lost traction and you need to correct it
Need to know what light comes on. More info needed.
These are most likely related - when the vehicle detects certain emissions faults it will turn off the vehicle's traction control - not a safety issue. The service light is on due to an emissions control fault - need to have vehicle scanned to find the source of the error.
possible abs or vvs speed sensor you need to check codes and go from there