This is a point is debated among those who install flooring. Bruce Hardwood Flooring, the leading hardwood seller in America states felt paper or red rosin in unnecessary for installation of a nail or staple down floor.
There are those who believe it acts as a vapor barrier. The issue with that thought is, if you need a vapor barrier over your wood subfloor, you shouldn't be installing wood anyway.
Some believe it will reduce the squeaks in the floor. This would be a hard thing to say for sure. If this is a concern, you may want to.
One thing that red rosin does do for sure is make flooring easier to install. You can more easily slide boards together and across the floor. The paper reduces the friction against the subfloor.
To install hardwood, first you need a bare floor, then you install the lined paper barrier, then you nail in the hardwood strips, sand it down, and then add a finish such as poly.
Trees cut down are timber trees for hardwood. Bamboo trees is another type of wood that is also used to make hardwood.
Nail it.
Not the best idea. Hardwood floor should be angle nailed down, but obviously you cant do that. I think hardwood flooring would dry out and separate in places if glued.
It would depend on the type of floor you are installing. There haven't been enough details about the project provided to answer this question thoroughly. If you are installing engineered hardwood just lay down a 3/4" piece of plywood and a moisture barrier. If you are installing a floating floor, use a moisture barrier and two 1/2" pieces of plywood. see related links
Hardwood should not be steam cleaned. Virtually every hardwood flooring manufacturer states that steam on a hardwood floor in time will damage it. Forcing steam down into the seams of the floor will inevitably cause moisture damage.
depends on the room size
you will get a scrap of paper that will have the code from under ground under hay. then go to the fountian and push them in order. then go down in the fountian and click on the people.
Well here are the steps: 1.get a paper,and a lamp 2.put the paper down. 3.Then put the lamp facing the paper. 4.Then put your hand under the lamp's light. DONE!!
I think it would come down to personalpreference but hardwood in a kitchen or bathroom can prove to be a mistake because of the water damage & water leakage factor. hardwood definitely gives you more back when its time to resale.
I have done this and I always have the hardwood installed first. Then I install the ceramic tile. To protect the hardwood floor from getting grout or glue on it I cover the hardwood floor with a soft cover (to prevent scratches) and tape it down. Then place a plastic cover over the hardwood. Then I can install the ceramic tile at the edge of the hardwood creating hardly or no seem and level with the hardwood. When its done it looks beautiful.I would install the tile first , that way you don't risk getting glue or grout on your hardwood.
The moving air under the paper reduces the air pressure. Since the air pressure above the paper is unchanged, it pushes down on the paper. The shape of an airplane wing forces the air passing over the top to move faster than the air beneath the wing. The difference in air pressure causes the wing to lift.