Want this question answered?
That would depend on which engine and what type of lube/sealant is used on the head bolts. Can't answer the question without more information.
keepundoing bolts till the engine falls away and your left with just the head gasket
Which head bolts need asealant applied to them on a 454 big block?
Not unless they have stretched.
65 foot pounds clean threads in block 1st and use sealant on the dolts that go into the water jacket...oil all other bolts
Some head gaskets come with a coat of "Copper coat" sealant already on it. You can use copper coat on a head gasket safely. I prefer "Indian Head Shellac" myself. Just be sure to completely clean the heads first, and apply the sealant liberally. If you use too much, you can damage your engine by the sealant leaking into the engine itself.
The shorter bolts go on the outside corners.
Shop for BlueDevil/16 oz. pour-n-go head gasket sealant 00209 with confidence at AutoZone.com.
45, 45, 65 ft lbs + 1/4 turn.
The 1999 Dodge 3.3 liter cylinder head bolts should be torqued at 160 pounds psi. The head bolts should be torqued in 40 pound intervals.
by removing the head bolts
torque for 2c engine cylinder head bolts