to lower the top, no, they will fold up, but to avoid creasing the windows it is good to remove them first
undo the bolts from the side and remove top. its not hard
it is on the driver side just beneath the exhaust manifold. you will need to remove the exhaust or the cv joint to drop the starter
throw a rock at it
driver side on left side of dash/steering wheel - remove panel on side
To be legal, yes.
To install the tubular side step on the Jeep Liberty, first remove the bolts and the running boards if the vehicle has them. Then, install the side step with the mounting brackets included. You might need to drill into the frame of the vehicle to place the bolts for the brackets. Then, add the step which bolts to the mounting bracket.
Under the dash on drivers side, above the fuse panel. (You will need to remove the plastic cover from the fuse panel/OBD port and also remove the lower dash.) Good info on the jeep forum....includes diagram. Sorry, I don't have the link.
just pull out the fromt and unzip the back (1998 soft top)
The blower motor on a 1987 Jeep Wrangler is typically located under the dashboard on the passenger side. It is mounted to the heater box and can be accessed by removing the lower dash panel. You may need to disconnect the electrical connector and remove a few screws to remove the blower motor for service or replacement.
no, but you will need side view mirrors.
In the side of the gas tank, near the driveshaft, it is easier to remove the fuel pump if you remove the driveshaft first
HIt it with a hammer, Also that is not how you spell LIBERTY. idiot.....