yes
I called our pool supply store after we found a mole in our pool and their advice confirmed what I had already believed. You need to shock your pool. Rodents carry rabies, among other things!
You do not need to remove it.
3800 gals of pool water shock it with 1 gal bleach
The pool is probably contamiated now, because there/is a dead carcass in it. First remove the squirrel, and dispose of it. Then you will need to cleanse the pool, a bleach solution should do the job. I would try and figure out why the squirrel fell in the pool, but whatever or you can call animal control like your supposed to Not all municipalities would send someone to remove the dead animal. After it is removed you will need to "shock" the pool with the chemicals that are ordinarily used (chlorine). The amount used depends upon the size of the pool, calling a store that handles pool chemicals or the city or county health department can obtain the information needed to solve the problem.
Remove the dead animal skim any floating materials from the top of the water vacuum the pool floor, then shock the pool with an extra strong dose of chlorine. The pool should be ok the next day.
shock it
You need to scoop it out then super shock the pool and run filter. There is a chance of E Coli bacteria so you need to make sure you shock the pool well
You should shock your pool upon finding a critter in it...I have had 2 chipmunk fatalities in my pool and a squirrel fatality and had to shock every time because the little guys can carry bacteria Good Luck
Is the pool full or empty? Depends how long they were in there. If it was just overnight, no big dal. If it was a week, I would shock the pool. Pool Masters.
Salt pools still require weekly shock maintenance, but not near the amount that a chlorine pool would need. There are Salt Pool Shock Treatments out there for your particular pool setup.
Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.
First of all remove all remains of the cat. then super chlorinate it and leave it to filter for a day. check the chlorine levels and every thing should be OK after that. so long as the chlorine levels are correct the water should be properly disinfected.