Both. You must access the cables and the top bolt to the starter mount from above in order to remove them, and then the remainder of the removal operation is done from underneath.
How to remove starter of 2002 Diamante.
How to remove starter on 2002 Acura 3.5 RL
(1) You must first remove the bracket clamp that retains the wiring harness to the trnsmission. (2) Disconnect the starter wires from the starter and that should give you the clearance you need to get a wrench on the upper starter bolt. (3) then remove the lower bolt.
how do you remove a flywheel on a 2002 Honda oddsey
It would have a starter relay and it is located in the power distribution box under the hood. Remove the black plastic cover and turn the cover over, it will tell you which relay is for the starter.
Disconnect the - battery cable Raise and support vehicle Disconnect wiring at the top of the starter Remove starter mounting bolts Remove starter
It is behind the starter, Will have to remove starter to get to it.
To replace the AC clutch discharge the freon, remove the clips, and remove the screws under the bumper. Remove the driver side headlight, and bolts.
Disconnect the - battery cable Raise and support vehicle Removde wiring harness at the top of the starter Remove starter mounting bolts Remove starter
It is behind the starter, You will need to remove the starter to get to it.
The starter is located under the intake manifold. You will have to remove the intake manifold being very careful not to drop any of the bolts into an in port. The starter is fairly easy to access once the manifold is off.
A new OEM Denso starter will cost around $150. A re-manufactured starter will cost around $95.