Yes - remove the battery, SIM card and any memory card, and unplug anything that's connected (ie headphones or charger). Leave the battery cover off, and lay the phone as close as possible (but not directly on) a radiator. Leave it for at least six hours to allow any moisture in the phone to evaporate.
Turn off the phone. Take out the battery and sim card for 30 seconds. Place the battery and sim card back in the phone, plug in the charger and turn it on. Unplug the charger, take the battery and sim card back out.
the memory card is in the battery like if you take of the back its right there o ya i have that phone
If you have AT&T, then yes. You can go into the AT&T store and they can how you how to do it. All you need is a SIM card and you just take the battery out of the go phone and put in your SIM card. It doesn't make any changes to your original plan.
If both the phones are GSM mobile phones, you can just open the Nokia phone (typically SIM card is under the battery, so you need to open the battery compartment), take out the SIM card and put it in the Razr phone. If you are just interested in transferring contact details and not your phone number, you can transfer data through Bluetooth. - Neeraj Sharma
Yes, you can see the SIM card in your pebl phone model U6. If you open the back of the phone and take out the battery, it should be there.
Take the back off then take the battery out and take the sim card and put it back all back on
not at all, as long as they are the same type, just take out your battery and viola.
Usually you open up the back of your phone and your sim card is being held in a holder, sometimes you may have to remove the battery if it's in the way. You take that sim card out and put in your new one. Sometimes phones take a minute or two to load with the new sim card. If you do that, it should load the sim cards information and regular phone number, unless it is a sim card from a different service provider, which in that case it may not work and show errors.AnswerIf your phone has one, turn off the power, remove the battery and typically the sim card is behind the battery. Often a clip or slide holds the sim card in place so you may need to examine it to figure out how to remove the sim card. YOU TAKE IT OUT AND PUT A DIFFERENT ONE IN!
firstly, open the backside of your phone then take the battery by pressing one side up and then take it from your phone.....
Relatively simple. Take the battery cover (the back of the phone) off. Remove the battery. Place the simcard in, gold pins down. Examine the battery 'hole' you will notice a further hole that goes underneath the sim card. Take your micro-sd card, gold pins facing towards the sim card and insert carefully. Press until you feel a spongey texture, press in all the way, then release. Remember: under the sim card, means that you need to remove the battery.
if its mobile u can just go to wal mart or target or family dollar, get a go phone or something that is not the same network, take out the sim card and use that. if u already have another sim card, open the back of your phone, take out the battery, it will be there. simply just switch it.
Most iPhones come with a sim card ejector, which is basically a small piece of metal with a pointy end. To remove the sim card, insert the pointy end of the ejector into the small hole at the top of the iPhone where the sim card tray is. If you don't have the sim card ejector, a small unravelled paper clip will do.