psi = Pounds / sq. inch = unit of Pressure
lb = Pounds = Unit of weight
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2
phsycic power that you can use to defeat enemies
First you should realize that "specific volume" is an intensive property - independent of the amount of a substance. It is the reciprocal of density. Second you need to remember that specific volume depends on both the pressure (150 psi in this case) AND the temperature. My guess is that you are interested in the specific volume of saturated steam at 150 psi. The specific volume of saturated steam at 150 psi is 26.78 ft3/lb.
14.7 psi
Many impact wrench's require 80 psi of air to operate at there best. You can get by with about 60 psi though.
3000 psi concrete weighs Approx 3900 Lb/yd3
Um... there are 1 psi (lb/in2) = 144 psf (lbf/ft2) , if by (lb ft) you meant pounnds per square foot. then there is 1/144 psi in 1 (lbf/ft2)
There are 13.8888888889 psi in a ton. There are 2000 pounds in 1 ton and a long ton weighs about 2200 pounds.
32---35 psi idle +8psi under load
20 ft of head can be easily converted to psi by using the specific weight of water: 62.4 lb/ft3 and converting the units to inches. 20ft * 62.4lb/ft3 / 144in2/ft2 = 8.67 psi
There is no paintball gun that runs on only 200 psi.
Most Kenworth radiators are 15 psi.
Both front and rear should be 2.0 BAR (or 28-29 lb psi).
smyd
Use this formula: psi x 0.07031 = kg/cm2
Use this formula: psi x 0.07031 = kg/cm2
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2