Yes. The dealer has a tool for that.
Can you show me pictures on a dodge neon 1998 on how to remove and replace a front axle.
You need to remove the head lap it has some scews on the side and on front.
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
Yes
Remove the driver side front wheel, remove the inner fender liner, remove the tie down bracket, remove the battery cables and then the battery
First you have to remove the left front wheel, then remove a cover on the inside splash shield to access the battery. Rick Coburn
You must remove the air box in front of battery, filter is hidden underneath.
remove two bolts on front bottom of spoiler then slide forward then up and off. let met know if you will get rid of it i need to replace one.
Which speakers are you trying to replace? Front or rear?
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
to dissasemble wheel bearings you need a special socket after you remove 4x4 hub this special socket will only fit the front bearing nut .a different size is used on the rear
The battery is located by the driver's front wheel. You have to turn the wheel all the way in to access the panel to remove the battery.