It's not broken, the power has been disconnected(flat battery, radio removed, blown fuse). Just do as the radio says, turn the key to the auxillary position, switch the radio on, wait 2 hrs and then enter the code.
Answer : How to reset code for SprinterThey are all different and correspond with the serial number on the radio itself. The 5 digit code should be on a card in the owners manual. To set the code the radio screen must read "CODE". If it reads "WAIT" you must wait until it reads "CODE again. Turn the volume control until you reached the number you want. Enter all 5 numbers. Once the full code is in hold the AM/FM buttons down for 5 seconds. This should reset the code and the radio should work normally.If you do not have the card with the code number on it a Sprinter dealer can look up the code by using your Vin number.
pull radio fuse, says back up... wait 10 mins.. replace... or disconnect battery for 10 mins, reconnect
To set your radio follow this procedureTurn car onTurn radio on, then off.Turn radio back on, a message CODE will appear.Enter code using the preset buttonswhen finished entering code, press the > button and you will hear sweet sounds of music!**if your radio says CODE WAIT, you will have to wait for an hour or so for the car to reset the code. There is NO WAY around this if your radio says CODE WAIT**If you do not have the code for your radio,Find out what model you have:turn car onturn radio on, then offTurn radio back on and press and hold the M button for 10 secondsa code will display on the radio with your model number of the radio.Call your local BMW dealer and tell them you have the serial # for the radio and need the code, be nice. If they cant/ wont give you the code, look up another dealer and call them, continue to call until a nice dealer gives you the info DO NOT PAY FOR IT!Source(s):Have owned many cars including 6 BMWs and 2 Mercedes
Turn the ignition lock on and the radio on and wait. It can take up to a couple of hours depending on how many times the incorrect code has been inputed in the radio.
Turn your ignition swith to on position,turn your radio on,code should appear on the screen of your radio. After code appears,enter first digit of your code. wait for first digit to flash. Then enter second digit,wait for flash,Then enter third digit,wait for flash. Then enter fourth digit, wait for flash. Then push * on your radio to except the code.
Every time a wrong code is entered the wait time doubles, you must just sit the wait time out with ignition on & re-enter correct code ( various proceedures for various models) or try disconnecting battery for an hour or so....... Good luck :-)
If you've recently interrupted the power supply (battery) then you will need to input the radio code. The code should be in your paperwork, if not, contact your dealer for the code. The "WAIT" code on the radio means you have input the wrong code more than 3 times and you have to wait 10 minutes before attempting to enter radio code.
Wait and Bleed.
Please wait while loading...
She may mean, " wait for me " if she likes you and if she doesn't like you she means, " don't wait for me. "
u press turn on the radio wait nm i dont know which kind the kind in a car or...............