0
What else can I help you with?
How do you convert 24volts to 12 volts?
If you want to convert 24v AC into 12v Ac, it's simple. Just get a transformer to convert 24 volts into 12 volts. This is called a stepdown transformer. If you want to convert 24v DC into 12v DC, it's more complicated. First you have to change the 24v DC into 24v AC by a switching converter that changes DC into AC. Then you would use a stepdown transformer as in the former example. Once the 24v AC is converted to 12v AC, then you use a rectifier bridge to change the 12v AC into 12v DC.
What do I need to do to convert 9 volts ac to 6 volts ac?
The "pat" answer is a stepdown transformer. But finding one that does this in this voltage range is not going to be easy. It's an "odd duck" in the world of voltage conversion. There are other approaches that might be used, but more knowledge of the project or application would be needed to make suggestions.
You have 480 volts coming into a stepdown transformer that is set for 440 volts incoming power would this cause your output voltage to be higher than 120 volts?
In short, probably. Transformers step power up or down by a multiplicative factor based on the number of turns in the two transformer coils. Therefore, if you put more voltage in you're going to get a proportional increase in the voltage out.
What is cheaper to run a electric fireplace on a 120 volts or 240 volts outlet?
Voltage does not affect the cost to run. You pay for the wattage, the higher the wattage the more it will cost to run.
Is there a way to install a 277V light on a 120V circuit?
no ----------------------------------------------------------------------------------- Stepdown transformer. More expensive than buying the correct light fixture. Y-THINK-Y
Is it cost more to run 220 amp or 110 amp?
I think you mean volts given the numbers you specify. To determine which costs more to run you need to multiply Volts x Amps. The circuit with the higher value will cost more to operate.
A transformer is used to step down a voltage of 11kv to 220 volts. Given that the primary coil has 3200 turns what is the number of turns on the secondary coil?
Your 11 kv to 220 volts represents a 50 to 1 stepdown. (There is 50 times more voltage in the primary than in the secondary.) You'll have to have a 50 to 1 turns ratio. That means 1/50 of the number of turns in the primary will be in the secondary, and that is 64 turns.
What has more ionization energy available 12.6 volts or 6.3 volts?
Which has more ionization energy available-10.5volts ,8.5volts ,6.3volts ,12.6volts.
How do you change a heater from 120 volts 3a to 240 volts 1.5 a?
the simplest solution is by connecting two 120v 3amps heater in series , the same can be used directly on 240v. However the current drawn will still be 3 amps & Not 1.5 amps. The heater output power will be double that of a single heater running on 120v. ( or equvalent to two heaters operating on 120v. supply ) A more expensive method is to use a stepdown transformer which can be powered on 240v & connect the heater on the transformer 120v side. this method will consume approx. 1.5 amps from the 240v supply.
Is 230 volts or 110 volts more economical?
You buy power by the watt-hour. It has zero to do with the voltage!
Why isn't everything rated at 480 volts?
Not everything needs to be. Many standard wire insulations are rated at 600 volts, some 300, and some are more or less. It would be cost-prohibitive to have everything rated at 480 volts. Especially things designed to operate at 120 volts. Things rated for 480 but running at 120 would be physically larger than necessary, and therefore more expensive. If you're wondering why everything doesn't just run at 480 it's because it's not safe for residential applications.
How much voltage will an alternator have to have before it will give 13 volts or more?
I'm not sure I understand your question. An alternator will have to produce 13 volts to charge a battery at 13 volts. Most alternators are able to produce 14+ volts but the range is 13.5 to about 15.5 volts.
